Call us Now for Inquiries on 08168759420 and 08068231953

DESIGN AND IMPLEMENTATION OF A DATABASE SYSTEM FOR A CARGO HANDLING BUSINESS (A CASE STUDY OF UPS ENUGU)

ABSTRACT

The document management system in most Cargo business with no doubt has been a very big difficult task in today’s effective data processing system. This project is to address the problems encountered by the staff of the Un-Interrupted Power Supply and their customers. In view of this problems, the manual process involved in the handling and management of Cargo in the un-interrupted power supply were critically studied and the flows are noted. This project went further to treat the different technique used in implementing the newly designed software. The study and understanding of this work will assist users in the management and handling of cargo effectively and efficiently. It is believed that at the end of this work, user will know the importance of computerized cargo management information system and it is easier in implementing it. This work is conducted towards the computerization of the existing system of processing data in order to identify some various problems that that is being encountered in mechanical aspect of it and the manual method of data processing in the billing of customers good and thereby recommending first class solution to the problem information. This theory also compares the existing system with the new system which is exact and a faster way of processing data and the problem that is face by customers when they are clearing  their goods from the wharf this theory includes with the implementation, programming, test, run, change over the implementation, process of the new system.

 

 

ORGANIZATION OF WORKS

CHAPTER ONE:- this chapter highlight the aims and objective of the study. Its nature, its limitation, delimitations and purposes etc.

CHAPTER TWO:- this deals with the available literature review as it is related to the projection question.

CHAPTER THREE:- this is where you make some descriptions and analysis of the existing system here the fact finding methods used were stated organizational structure of the Ups you used as your case study. The objectives of the existing system, the input, process and output analysis of the existing system information flow diagram problems of the existing system and justification of the new system.

CHAPTER FOUR:- this is the design and implementation of the new system, the output input specification and design. File design, procedure chart, system flow chart and system requirement.

CHAPTER FIVE:- this is where you have the program design, program flowchart, pseudo-code, source program and test run.

CHAPTER SIX:- this is documentation

CAHPTER:- this is the recommendation and conclusion

 

 

 

 

TABLE OF CONTENTS

TITLE PAGE

CERTIFICATION

DEDICATION

ACKNOWLEDGEMENT

ABSTRACT

ORGANIZATION OF WORKS

 

CHAPTER

1.0      INTRODUCTION

1.1      STATEMENT OF PROBLEM

1.2      AIMS AND OBJECTIVES

1.3      PURPOSE OF STUDY

1.4      SIGNIFICANT OF THE STUDY

1.5      SCOPE/DELIMITATION

1.6      LIMITATION/CONSTRAINT

1.7      ASSUMPTION OF STUDY

1.8      DEFINITION OF TERMS

,,

CHAPTER TWO

2.0      REVIEW OF RELEVANT LITERATURE

CHAPTER THREE

3.0      DESCRIPTION AND ANALYSIS OF THE EXISTING SYSTEM

3.1      FACT FINDINGS METHOD/METHODLOGY

3.2      ORGANIZATIONAL STURICTURE/ORGANIGRAM

3.3      OBJECTIVES OF THE EXISTING SYSTEM

3.4      INPUT, PROCESS AND OUTPUT ANALYSIS

3.4.1 INPUT ANALYSIS

3.4.2 PROCESS ANALYSIS

3.4.3 OUTPUT ANALYSIS

3.5 INFORMATION FLOW DIAGRAM

,

CHAPTER FOUR

4.0      DESIGN OF THE NEW SYSTEM

4.1      DESIGN STANDARD

4.2      OUTPUT SPECIFICATION AND DESIGN

4.3      INPUT SPECIFICATION AND DESIGN

4.3.1 FILE DESIGN

4.4 PROCEDURE CHART

4.5 SYSTEM FLOWCHART

4.6 SYSTEM REQUIREMENT

4.6.1 HARDWARE REQUIREMENT

4.6.2 SOFTWARE REQUIREMENT

4.6.3 OPERATIONAL REQUIREMENT

4.6.4 PERSONNEL REQUIREMENT

,,

CHAPTER FIVE

5.0      IMPLEMENTATION

5.1      DESIGN STANDARD

5.2      PROGRAM DESIGN

5.2.1PROGRAM FLOWCHART

5.2.2 PSEUDOCODE

5.3      CODING

5.4      TEST DATA/TEST RUN

5.5      USER TRAINIGN –AN OVERVIEW

5.6      CUTOVER PROCESS

<

CHAPTER SIX

6.0      DOCUMENTATION

6.1      PROGRAM DOCUMENTATION

6.2      USER DOCUMENTATION

 

CHAPTER SEVEN

7.0      RECOMMENDATION

7.1      SUMMARY

7.2      CONCLUSION

REFERENCE

CHAPTER ONE

1.0      INTRODUCTION

Computer plays a vital role in the development of any Company, it also solves some of its complex problem faced by man and processed voluminous data within a short period of time.

Recent emphasis on information and data processing in most of our cargo business has grown vastly as in the case of Un-Interrupted Power Supply Enugu than an alternative method has to be mechanical handling of data, preparing of cargo, manifest etc. Un-Interrupted Power Supply is accompanying that handles goods, transport them form one place to other. Computer technology has come to be accepted as an indispensable innovation in cargo system. It is an all purpose machine that accept data as input and process it using a set of information given out result as output, which can be retrieved for future use. And its revolution has been evident in cargo. In order to eliminate most hardship encountered in most of cargo business, the need for the computerization with the design and implementation of a database system for a cargo handling business and its advantage to the cargo business is needed.

 

1.1   STATEMENT OF PROBLEM

The management of cargo in Nigeria has over the years attracted poor patronage as a result of error that loss of customer’s good is new the order of the day, the reason are not far fetched due to the manually procedure involved. Clients has no other option than to be at the mercy of this error prime procedure and the storage of information such as files and other important document can easily be last thereby attracting distrust of the firm by its client customer as a result of eagerness would prefer there are so many activities involves there will be delay in processing and this does not portray the image of the UPS in a good way.

 

1.2   AIMS AND OBJECTIVES

The aims and objectives of this study is to develop and implement a computerized cargo database management information system that will make provision of the following;

  • To ensure a fast and more efficient services to the customer based on quick access data and accurate in information. The branch of all routine work which does not demand quantitative consideration do enable them provide better counter service.
  • To be receivable and capable of providing an up to data information relevant to the UPS and their clients.
  • To affect a simpler handling of bill of loading and updating o customers manifest.
  • Check of fraud and other criminal acts which lead to security and control.

 

1.3   PURPOSE OF STUDY

The existing system of super Un-Interrupted Power Supply agency has exhibited some loop holes and it is against this loop holes that this work was carried out. The study also understanding to produce a system which will address the loops holes and co-operate need of the cargo ups at the smallest possible cost and within the limit of technology available which was the driving force of this project.

1.4      SIGNIFICANCE OF THE STUDY

With the computerization of the ups, this biting system will be efficient and reliable. The establishment of the new system will create for a faster and efficient means of transacting business between the cargo ups and the customers. There will be a networked and direct of communication between cargo companies both in and outside the country process like billing daily report generation customer registration will be perform with speed efficiently existing loot in cured.

The information cargoing to the customer and his gods will be secured as they are contained in the computer and there will be case to store and retrieve information to and fro form the computer.

 

1.5   SCOPE/DELIMITATION

This study is restricted to the full operation of super ups cargo ups Enugu. This research work ended on how the problem of accessing bulky data by the workers can be turned to computer responsibility thereby making process easy the work focused on the super ups cargo Enugu that choose to be the case study here the data I collected are based on the secondary data as well as the ups that attend to customer of the cargo ups.

I also strongly believe that the fact and observation I got from the ups are well reliable for the study to be very successive one.

 

1.6   LIMITATIONS

During the process of carrying out the study I encountered many problems.

Firstly, it was difficult in a way to get to the staff of different section of the ups to talk about the present state of computerized cargo transportation management information system. Due to the fact of that it were thought to be complicated. Too a lot of stremoius big to make this study a very successful one and also variable.

However, inspite of all these limitation, the study has been able to a large extent achieved the best out of the limited resources.

 

 

1.7   ASSUMPTION OF STUDY

I assume that this new system will go a long way to help and improve the work output of my case study. Furthermore, this project will also be of a great importance in the area of data management and information processing.

 

1.8   DEFINITION OF TERMS

CARGO – good carried in a ship

TONNAGE – a measure of the capacity of a good

BILL OF LOADING – a list giving details of a ship cargo

CONSIGNEE – a person or company to whom goods are sent from the counting of export and who receives them

MAANIEEST – a list of all cargo on the ship

WHART – this is a landing stage built along the shores for loading or unloading cersus

OCEAN FREIGHT – this is an amount charged by the carrier for transportation of goods by sea.

WAREHOUSE – this is a store house

TRANSPORT – this is carriage of goods form one place to another

COMPUTER – this is an electronic machine that accepts data as input, process, it uses a set of instructions and given out result of instructions and given out result as output. It also stores information which could be received for future use.

DATA – these are raw facts that have not been processed

DISK – it is storage device that stores data or information

 

 

 

HOW TO GET THE FULL PROJECT WORK

 

PLEASE, print the following instructions and information if you will like to order/buy our complete written material(s).

 

HOW TO RECEIVE PROJECT MATERIAL(S)

After paying the appropriate amount (#3000) into our bank Account below, send the following information to

08139462710 or 08137701720

 

(1)    Your project topics

(2)     Email Address

(3)     Payment Name

(4)    Teller Number

We will send your material(s) immediately we receive bank alert

 

BANK ACCOUNTS

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 0046579864

Bank: GTBank.

 

OR

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 2023350498

Bank: UBA.

 

HOW TO IDENTIFY SCAM/FRAUD

As a result of fraud in Nigeria, people don’t believe there are good online businesses in Nigeria.

 

But on this site, we have provided “table of content and chapter one” of all our project topics and materials in order to convince you that we have the complete materials.

 

Secondly, we have provided our Bank Account on this site. Our Bank Account contains all information about the owner of this website. For your own security, all payment should be made in the bank.

 

No Fraudulent company uses Bank Account as a means of payment, because Bank Account contains the overall information of the owner

 

CAUTION/WARNING

Please, DO NOT COPY any of our materials on this website WORD-TO-WORD. These materials are to assist, direct you during your project.  Study the materials carefully and use the information in them to develop your own new copy. Copying these materials word-to-word is CHEATING/ ILLEGAL because it affects Educational standard, and we will not be held responsible for it. If you must copy word-to-word please do not order/buy.

 

That you ordered this material shows you have agreed not to copy word-to-word.

 

 

FOR MORE INFORMATION, CALL:

08139462710 or 08137701720

 

YOU CAN ALSO CALL:

08068231953, 08168759420

 

 

Visit any of our project websites below:

www.easyprojectmaterials.com

www.easyprojectmaterials.com.ng

www.easyprojectmaterial.net

www.easyprojectmaterial.net.ng

www.easyprojectsolutions.com

www.worldofnolimit.com

www.worldofnolimit.com

www.nairaproject.com.ng

www.nairaprojects.com.ng

www.nairaproject.net

www.nairaprojects.net

www.uniproject.com.ng

www.uniprojects.com.ng

 

 

 

 

 

 

Tags:

7 years ago 0 Comments Short URL