Call us Now for Inquiries on 08168759420 and 08068231953

MECHANICAL ENGINEERING PROJECT MATERIALS

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE:

WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953,08168759420

 

WE WILL THEN SEND PROJECT TOPICS AND MATERIALS IN POLITICAL SCIENCE , THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE

 

NOTE ALSO:

  WE WILL THEN SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE WITHIN 48 HOURS

JUST SEND YOUR EMAIL ADDRESS AND THE APPROVED TOPIC TO 08068231953, 08168759420

 

 

MECHANICAL ENGINEERING PROJECT  MATERIALS

 

1 FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
2 FABRICATION OF METAL SHELF
3 RURAL MANAGEMENT AS A STRATEGY FOR REDUCING RURAL – URBAN MIGRATION IN NIGERIA
(A CASE STUDY OF ISHIELY LOCAL GOVERNMENT AREA OF EBONYI STATE)
4 CONSTRUCTION OF A MOBILE REFRIGERATOR
FRIDGE
5 DESIGN A ND FABRICATION OF A DUST EXTRACTOR
6 CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
7 DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
8 DESIGN AND CONSTRUCTION OF A SPIN DRYER
9 CONSTRUCTION OF A WOODEN BOOK SHELF
10 DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE
11 REPAIR OF A DAMAGED REFRIGERATOR
12 CONSTRUCTOIN OF AN OPEN STEAM DISTILLATOIN COLUMN
13 THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
14 DESIGN AND CONSTRUCTION OF BAKING OVEN
15 REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
16 REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE
17 CONSTRUCTION OF PROPELLER AGITATOR
18 CONSTRUCTION OF TWO FACE GAS BURNER
19 REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
20 AN EVALUATION OF PROPERTY RATING PRACTICE IN NIGERIA
(A CASE STUDY OF ENUGU NORTH LOCAL GOVERNMENT AREA)
21 MANAGEMENT OF COMMERCIAL PROPERTIES IN NIGERIA
(A CASE STUDY AT AWKA METROPOLIS)
22 FABRICATION OF A FOLDABLE CAMP BED
23 THE PROBLEM OF SOLID WASTE
MANAGEMENT IN ENUGU METROPOLIS
A CASE STUDY IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) CAMPUS III ENUGU
24 REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER
25 REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO
26 DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.
27 DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
28 THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
29 THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
30 A COMPARATIVE ANALYSIS OF RENTAL VARIATION IN RESIDENTIAL AND COMMERCIAL PROPERTIES IN NIGERIA
(A CASE STUDY OF OGUI NEW LAYOUT ENUGU)
31 DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER
32 PRODUCTION AND ACCEPTABILITY STUDIES OF MALTED SORGHUM (SORGHUM BICOLOR) BISCUIT
33 CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN)
WITH DUAL POWER SOURCE (ELECTRIC/GAS)
34 RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.

39 DESIGN AND FABRICATION OF WOOD LATHE MACHINE
40POLLUTANTS IN ENUGU URBAN,AN EMISSION INVENTORY
OF POLLUTANTS IN ENUGU URBAN
41. THE RATE OF BLEACHING OF PALM OIL WHITE COAL.

 

 

42PRODUCTION OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.
43.CHARACTERIZATION OF SOME BRANDED MOTOR Oil
44.DEVELOPING THE PROCESS OF PLASTIC INDUSTRY IN NIGERIA
45 PRODUCTION OF HIGH QUALITY BODY PERFUME
46 PROCESS DEVELOPMENT IN THE PRODUCTION OF VEGETABLE OIL FROM LOCAL RAW MATERIAL
47 COMPARISM RESEARCH ON SOAP AND DETERGENT POWDER
48 PRODUCTION OF VEGETABLE OIL USING
ENUGU COAL
49NEW FORMULAE FOR ESTIMATING FIXED INVESTMENT CAPITAL COSTS
50PRODUCTION OF HOUSE HOLD INSECT- KILLER
51 RESEARCH PROJECT ON BLEACHING OF PALM OIL WITH NIGERIA CLAY
52.MODIFICATION OF MODEL SEDIMENTATION TANK
53.CONSTRUCTION OF METAL MOULD FOR SOAP PRODUCTION
54.CONSTRUCTION OF A SIMPLE METALLIC MOULD

 

 

 

 

 

 

 

 

 

AFFILIATE LINKS:

 

www.projectanswerng.com   www.projectanswersng.com   www.projectstockng.com

www.projectstocksng.com      www.projectstoreng.com         www.projectstoresng.com

www.projectarchiveng.com     www.projectarchivesng.com    www.projectdocng.com

www.projectdocsng.com         www.projectfileng.com              www.projectfilesng.com

www.myprojectng.com            www.myprojectsng.com            www.mymaterialng.com

www.mymaterialsng.com         www.projectsolutionng.com      www.projectsolutionsng.com

www.projectdeveloperng.com   www.projectdevelopersng.com   www.projectworkng.com

www.projectworksng.com         www.easyprojectmaterials.com      www.worldofnolimit.com

www.easyprojectsolutions.com   www.fastprojectmaterials.com     www.currentprojectmaterials.com

www.sweetprojectmaterials.com   www.softprojectmaterials.com  www.easyprojectstock.com

www.easyprojectmaterials.com.ng    www.easyprojectsmaterial.com

www.easyprojectsmaterials.com       www.easyprojectsmaterial.com.ng

www.easyprojectsmaterials.com.ng    http://projectdevelopersng.blogspot.com

http://myprojectsng.blogspot.com                         http://projectdeveloperng.blogspot.com

http://projetsoft.blogspot.com                                http://googleprojectsng.blogspot.com

http://ngtopicstop.blogspot.com                             http://googletopicsng.blogspot.com

http://myprojectng.blogspot.com                            http://ngtopics.blogspot.com

www.projectfilesng.blogspot.com                            www.projectfileng.blogspot.com

www.projectmaterials.blogspot.com                       www.projectmaterialsng.blogspot.com

www.projectmaterialng.blogspot.com                    www.projectstoreng.blogspot.com

www.projectstoresng.blogspot.com                         www.projectsstoresng.blogspot.com

www.projectworksng.blogspot.com                          www.projectsworksng.blogspot.com

www.projectbaseng.blogspot.com                             www.projectbasesng.blogspot.com

www.projectshareng.blogspot.com                           www.projectsharesng.blogspot.com

www.projectwriteupng.blogspot.com                       www.projectwriteupsng.blogspot.com

www.projectdocng.blogspot.com                               www.projectdocsng.blogspot.com

www.projecttextng.blogspot.com                               www.projecttextsng.blogspot.com

www.projecttestng.blogspot.com                               www.projecttestsng.blogspot.com

www.projectanswerng.blogspot.com                         www.projectanswersng.blogspot.com

www.projectsolutionsng.blogspot.com                     www.projectsolutionng.blogspot.com

www.projectengineng.blogspot.com                          www.projectenginesng.blogspot.com

www.projectcreationng.blogspot.com                        www.projectcreationsng.blogspot.com

www.projectlandng.blogspot.com                               www.projectlandsng.blogspot.com

www.projectworldng.blogspot.com                             www.projectworldsng.blogspot.com

www.projectglobeng.blogspot.com                              www.projectglobesng.blogspot.com

www.projectuniverseng.blogspot.com                         www.projectuniversalng.blogspot.com

www.projectideang.blogspot.com                                www.projectideasng.blogspot.com

www.projectbestng.blogspot.com                                www.projectbestsng.blogspot.com

www.projectbirthng.blogspot.com                                www.projectbirthsng.blogspot.com

www.projectcaseng.blogspot.com                                 www.projectcasesng.blogspot.com

www.projectmineng.blogspot.com                                 www.projectminesng.blogspot.com

www.projecttimeng.blogspot.com                                  www.projecttimesng.blogspot.com

www.projectwebng.blogspot.com                                    www.projectwebsng.blogspot.com

www.projectlinksng.blogspot.com                                 www.projectlinkng.blogspot.com

www.projectdigitalng.blogspot.com                               www.projectdigitalsng.blogspot.com

www.projectlanguageng.blogspot.com                          www.projectlanguagesng.blogspot.com

www.projectresultng.blogspot.com                                 www.projectresultsng.blogspot.com

www.projectadvertng.blogspot.com                                www.projectadvertsng.blogspot.com

www.projecthomeng.blogspot.com                                 www.projecthomesng.blogspot.com

www.projectproviderng.blogspot.com                            www.projectprovidersng.blogspot.com

www.projectpageng.blogspot.com                                   www.projectpagesng.blogspot.com

www.projecttoolng.blogspot.com                                     www.projecttoolsng.blogspot.com

www.projecttrendng.blogspot.com                                   www.projecttrendsng.blogspot.com

www.projectshopng.blogspot.com                                     www.projectshopsng.blogspot.com

www.projectsampleng.blogspot.com                                www.projectsamplesng.blogspot.com

www.projectclickng.blogspot.com                                     www.projectclicksng.blogspot.com

www.projectspotng.blogspot.com                                    www.projectspotsng.blogspot.com

www.projectprimeng.blogspot.com                                   www.projectprimesng.blogspot.com

www.projectvisibilityng.blogspot.com                            www.projectvisibilitysng.blogspot.com

www.projectcontentng.blogspot.com                             www.projectcontentsng.blogspot.com

www.projectdeliveredng.blogspot.com                           www.projectsdeliveredng.blogspot.com

www.projecttopng.blogspot.com                                      www.projecttopsng.blogspot.com

www.projectdownloadng.blogspot.com                           www.projectdownloadsng.blogspot.com

www.projectsystemng.blogspot.com                                www.projectsystemsng.blogspot.com

www.projectupdateng.blogspot.com                                 www.projectupdatesng.blogspot.com

www.projectstatementng.blogspot.com                            www.projectstatementsng.blogspot.com

www.projectsearchng.blogspot.com                                  www.projectsearchesng.blogspot.com

www.projectsetupngng.blogspot.com                                 www.projectsetupsng.blogspot.com

www.projectvariableng.blogspot.com                               www.projectvariablesng.blogspot.com

www.projectpaceng.blogspot.com                                      www.projectpacesng.blogspot.com

www.projectinfong.blogspot.com                                        www.projectinfosng.blogspot.com

www.projectindexng.blogspot.com                                      www.projectindexesng.blogspot.com

www.projecttrademarkng.blogspot.com                           www.projecttrademarksng.blogspot.com

www.projectauthorng.blogspot.com                                    www.projectauthorsng.blogspot.com

www.projectthingng.blogspot.com                                       www.projectthingsng.blogspot.com

www.projectageng.blogspot.com                                            www.projectagesng.blogspot.com

 

 

Tags:

7 years ago 0 Comments Short URL

MECHANICAL ENGINEERING PROJECT MATERIALS

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE:

WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953,08168759420

WE WILL THEN SEND PROJECT TOPICS AND MATERIALS IN POLITICAL SCIENCE , THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE

 

NOTE ALSO:

  WE WILL THEN SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE WITHIN 48 HOURS

JUST SEND YOUR EMAIL ADDRESS AND THE APPROVED TOPIC TO 08068231953, 08168759420

 

MECHANICAL ENGINEERING PROJECT MATERIALS

 

1. AN ELECTRIC POP-CORN MACHINE
2. AUTOMOBILE MOTOR VEHICLE CONSTRUCTION
3. BENCH SHAPING MACHINE
4. CONSTRUCTION OF A MOBILE REFRIGERATOR
5. CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
6. CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG DANZA BUS
7. CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR
8. CONSTRUCTION OF A STANDARD BAKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)
9. CONSTRUCTION OF A VERTICAL FIRE TUBE BOILER
10. CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
11. CONSTRUCTION OF CELLOPHANE SEALING AND CUTTING MACHINE
12. CONSTRUCTION OF GRAIN GRINDING MACHINE
13. CONSTRUCTION OF TWO FACE GAS BURNER
14. DESIGN A ND FABRICATION OF A CONCRETE FLOOR TILES MOULDING MACHINE
15. DESIGN A ND FABRICATION OF A DUST EXTRACTOR
16. DESIGN AND CONSTRUCTION OF A 505 PEUGOT PISTON MOULD
17. DESIGN AND CONSTRUCTION OF A CREEP TESTING EQUIPMENT FOR LOW TEMPERATURE MELTING MATERIAL (PLASTICS)
18. DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
19. DESIGN AND CONSTRUCTION OF A SPIN DRYER
20. DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE
21. DESIGN AND CONSTRUCTION OF BAKING OVEN
22. DESIGN AND CONSTRUCTION OF METALLIC BOOKSHELF
23. DESIGN AND CONSTRUCTION OF PUNCH AND DIE FOR PRODUCTION OF CUPS
24. DESIGN AND FABRICATION OF 80CM X 70CM X 50CM MOBILE DEEP FREEZER
25. DESIGN AND FABRICATION OF A 12M3 MOBILE DEEP FREEZER
26. DESIGN AND FABRICATION OF A CREEP TESTING EQUIPMEMT
27. DESIGN AND FABRICATION OF A MECHANICAL LAWN MOWER
28. DESIGN AND FABRICATION OF A METAL BOOKSHELF
29. DESIGN AND FABRICATION OF A MOBILE DEEP FREEZER
30. DESIGN AND FABRICATION OF A MOBILE REFRIGERATOR.
31. DESIGN AND FABRICATION OF A PALM FRUIT DIGESTER
32. DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
33. DESIGN AND FABRICATION OF A PRINTING I BLOCK MACHINE
34. DESIGN AND FABRICATION OF AN ELECTRIC STOVE/OVEN
35. DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE
36. DESIGN AND FABRICATION OF CHILDREN SWING
37. DESIGN AND FABRICATION OF CORN SHELLING MACHINE
38. DESIGN AND FABRICATION OF CREEP MATERIAL TESTING EQUIPMENT
39. DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.
40. DESIGN AND FABRICATION OF WOOD LATHE MACHINE
41. FABRICATION OF A FOLDABLE CAMP BED
42. FABRICATION OF A METALLIC BOOKSHELF

43. FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
44. FABRICATION OF A STANDARD WHEELBARROW
45. FABRICATION OF BENCH SHEARING MACHINE
46. FABRICATION OF METAL SHELF
47. FABRICATION OF REFRIGERATOR (DEEPFREEZE)
48. NYLON CUTTING AND SEALING MACHINE
49. RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.
50. REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO
51. REHABILITATION OF INSTITUTE’S GROUP BUS.
52. REPAIR AND FABRICATION OF A REFRIGERATOR SYSTEM
53. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING
54. REPAIR AND REHABILITATION OF A FACULTY AIR-CONDITIONER IN ENGR. OMEJE’S OFFICE IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (IMT), ENUGU.
55. REPAIR AND REHABILITATION OF A FACULTY REFRIGERATOR
56. REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER
57. REPAIR AND REHABILITATION OF A FAULTY AIR- CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE AT INSTITUTE OF MANAGEMENT AND TECHNOLOGY (IMT) ENUGU
58. REPAIR AND REHABILITATION OF A FAULTY AIR-CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T.) ENUGU
59. REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER
60. REPAIR AND REHABILITATION OF A ROOM AIR-CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT.
61. REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
62. REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE
63. REPAIR OF A DAMAGED REFRIGERATOR
64. REPAIR OF A FAULTY REFRIGERATOR IN THE MECHANICAL ENGINEERING DEPARTMENT OF THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU
65. REPAIR OF AN AIR CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT
66. REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
67. THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER.
68. THE CONSTRUCTION AND FABRICATION OF A METAL BOOKSHEET
69. THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
70. THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE
71. THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE

72. THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE
73. THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
74. THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
75. THE FABRICATION OF A PRESSURIZED KEROSENE OVEN
76. THE FABRICATION OF A SINGLE FACE PRESSURIZED KEROSENE COOKER.
77 FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
78 FABRICATION OF METAL SHELF
79 RURAL MANAGEMENT AS A STRATEGY FOR REDUCING RURAL – URBAN MIGRATION IN NIGERIA (A CASE STUDY OF ISHIELY LOCAL GOVERNMENT AREA OF EBONYI STATE)
80 CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
91 DESIGN A ND FABRICATION OF A DUST EXTRACTOR
92 CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
93 DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
94 DESIGN AND CONSTRUCTION OF A SPIN DRYER
95 CONSTRUCTION OF A WOODEN BOOK SHELF
96 DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE
97 REPAIR OF A DAMAGED REFRIGERATOR
98 CONSTRUCTOIN OF AN OPEN STEAM DISTILLATOIN COLUMN
99 THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
100 DESIGN AND CONSTRUCTION OF BAKING OVEN
101 REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
102 REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE
103 CONSTRUCTION OF PROPELLER AGITATOR
104 CONSTRUCTION OF TWO FACE GAS BURNER
105 REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
106 AN EVALUATION OF PROPERTY RATING PRACTICE IN NIGERIA
(A CASE STUDY OF ENUGU NORTH LOCAL GOVERNMENT AREA)
107 MANAGEMENT OF COMMERCIAL PROPERTIES IN NIGERIA (A CASE STUDY AT AWKA METROPOLIS)
108 FABRICATION OF A FOLDABLE CAMP BED
109 THE PROBLEM OF SOLID WASTE MANAGEMENT IN ENUGU METROPOLIS
A CASE STUDY IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) CAMPUS III ENUGU
110 REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER
111 REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO
112 DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.
113 DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
114 THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
115 THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
116 A COMPARATIVE ANALYSIS OF RENTAL VARIATION IN RESIDENTIAL AND COMMERCIAL PROPERTIES IN NIGERIA (A CASE STUDY OF OGUI NEW LAYOUT ENUGU)
117 DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER
118 PRODUCTION AND ACCEPTABILITY STUDIES OF MALTED SORGHUM (SORGHUM BICOLOR) BISCUIT
119 CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)
120 RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.
121 DESIGN AND FABRICATION OF WOOD LATHE MACHINE
122 POLLUTANTS IN ENUGU URBAN AN EMISSION INVENTORY OF POLLUTANTS IN ENUGU URBAN
123. THE RATE OF BLEACHING OF PALM OIL WHITE COAL.
124 PRODUCTION OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.
125 CHARACTERIZATION OF SOME BRANDED MOTOR OIL
126 DEVELOPING THE PROCESS OF PLASTIC INDUSTRY IN NIGERIA
127 PRODUCTION OF HIGH QUALITY BODY PERFUME
128 PROCESS DEVELOPMENT IN THE PRODUCTION OF VEGETABLE OIL FROM LOCAL RAW MATERIAL
129 COMPARISM RESEARCH ON SOAP AND DETERGENT POWDER
130 PRODUCTION OF VEGETABLE OIL USING ENUGU COAL
131 NEW FORMULAE FOR ESTIMATING FIXED INVESTMENT CAPITAL COSTS
132 PRODUCTION OF HOUSE HOLD INSECT- KILLER
133 RESEARCH PROJECT ON BLEACHING OF PALM OIL WITH NIGERIA CLAY
134 MODIFICATION OF MODEL SEDIMENTATION TANK
135 CONSTRUCTION OF METAL MOULD FOR SOAP PRODUCTION
136 CONSTRUCTION OF A SIMPLE METALLIC MOULD

 

 

 

 

 

 

 

 

 

AFFILIATE LINKS

 

www.uniproject.com.ng
www.uniprojects.com.ng
www.uniprojectz.net
uni-project.net
hiwriters.com.ng
hiwriter.com.ng
hiwriters.net
hiwriter.net
jamtechproject.com.ng
jamtechprojects.com.ng
jamtechproject.net
jamtechprojects.net
www.easyprojectmaterials.com
www.easyprojectsolutions.com
www.worldofnolimit.com
www.easyprojectmaterials.com.ng
www.easyprojectsmaterials.com.ng
www.easyprojectsmaterials.com
www.easyprojectsmaterial.com
www.easyprojectsmaterial.com.ng
www.easyprojectmaterial.com.ng
www.projectmaterial.com.ng
www.projectmaterials.com.ng
www.projectmaterials.com
www.myprojectmaterial.com.ng
www.myprojectmaterials.com
www.researchprojectmaterial.com
www.researchprojectmaterials.com

www.nairaproject.com.ng

www.nairaprojects.com.ng

www.nairaproject.net

www.nairaprojects.net

 

 

 

 

 

 

Tags:

7 years ago 0 Comments Short URL

MECHANICAL ENGINEERING PROJECT MATERIALS :

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE:

WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953,08168759420

WE WILL THEN SEND PROJECT TOPICS AND MATERIALS IN POLITICAL SCIENCE , THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE

 

NOTE ALSO:

  WE WILL THEN SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE WITHIN 48 HOURS

JUST SEND YOUR EMAIL ADDRESS AND THE APPROVED TOPIC TO 08068231953, 08168759420

 

MECHANICAL ENGINEERING PROJECT MATERIALS  :

 

1 FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
2 FABRICATION OF METAL SHELF
3 RURAL MANAGEMENT AS A STRATEGY FOR REDUCING RURAL – URBAN MIGRATION IN NIGERIA
(A CASE STUDY OF ISHIELY LOCAL GOVERNMENT AREA OF EBONYI STATE)
4 CONSTRUCTION OF A MOBILE REFRIGERATOR
FRIDGE
5 DESIGN A ND FABRICATION OF A DUST EXTRACTOR
6 CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
7 DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
8 DESIGN AND CONSTRUCTION OF A SPIN DRYER
9 CONSTRUCTION OF A WOODEN BOOK SHELF
10 DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE
11 REPAIR OF A DAMAGED REFRIGERATOR
12 CONSTRUCTOIN OF AN OPEN STEAM DISTILLATOIN COLUMN
13 THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
14 DESIGN AND CONSTRUCTION OF BAKING OVEN
15 REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
16 REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE
17 CONSTRUCTION OF PROPELLER AGITATOR
18 CONSTRUCTION OF TWO FACE GAS BURNER
19 REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
20 AN EVALUATION OF PROPERTY RATING PRACTICE IN NIGERIA
(A CASE STUDY OF ENUGU NORTH LOCAL GOVERNMENT AREA)
21 MANAGEMENT OF COMMERCIAL PROPERTIES IN NIGERIA
(A CASE STUDY AT AWKA METROPOLIS)
22 FABRICATION OF A FOLDABLE CAMP BED
23 THE PROBLEM OF SOLID WASTE
MANAGEMENT IN ENUGU METROPOLIS
A CASE STUDY IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) CAMPUS III ENUGU
24 REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER
25 REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO
26 DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.
27 DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
28 THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
29 THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
30 A COMPARATIVE ANALYSIS OF RENTAL VARIATION IN RESIDENTIAL AND COMMERCIAL PROPERTIES IN NIGERIA
(A CASE STUDY OF OGUI NEW LAYOUT ENUGU)
31 DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER
32 PRODUCTION AND ACCEPTABILITY STUDIES OF MALTED SORGHUM (SORGHUM BICOLOR) BISCUIT
33 CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN)
WITH DUAL POWER SOURCE (ELECTRIC/GAS)
34 RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.

39 DESIGN AND FABRICATION OF WOOD LATHE MACHINE
40POLLUTANTS IN ENUGU URBAN,AN EMISSION INVENTORY
OF POLLUTANTS IN ENUGU URBAN
41. THE RATE OF BLEACHING OF PALM OIL WHITE COAL.

 

 

42PRODUCTION OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.
43.CHARACTERIZATION OF SOME BRANDED MOTOR Oil
44.DEVELOPING THE PROCESS OF PLASTIC INDUSTRY IN NIGERIA
45 PRODUCTION OF HIGH QUALITY BODY PERFUME
46 PROCESS DEVELOPMENT IN THE PRODUCTION OF VEGETABLE OIL FROM LOCAL RAW MATERIAL
47 COMPARISM RESEARCH ON SOAP AND DETERGENT POWDER
48 PRODUCTION OF VEGETABLE OIL USING
ENUGU COAL
49NEW FORMULAE FOR ESTIMATING FIXED INVESTMENT CAPITAL COSTS
50PRODUCTION OF HOUSE HOLD INSECT- KILLER
51 RESEARCH PROJECT ON BLEACHING OF PALM OIL WITH NIGERIA CLAY
52.MODIFICATION OF MODEL SEDIMENTATION TANK
53.CONSTRUCTION OF METAL MOULD FOR SOAP PRODUCTION
54.CONSTRUCTION OF A SIMPLE METALLIC MOULD

 

 

 

 

 

 

 

AFFILIATE LINKS:

 

www.projectanswerng.com   www.projectanswersng.com   www.projectstockng.com

www.projectstocksng.com      www.projectstoreng.com         www.projectstoresng.com

www.projectarchiveng.com     www.projectarchivesng.com    www.projectdocng.com

www.projectdocsng.com         www.projectfileng.com              www.projectfilesng.com

www.myprojectng.com            www.myprojectsng.com            www.mymaterialng.com

www.mymaterialsng.com         www.projectsolutionng.com      www.projectsolutionsng.com

www.projectdeveloperng.com   www.projectdevelopersng.com   www.projectworkng.com

www.projectworksng.com         www.easyprojectmaterials.com      www.worldofnolimit.com

www.easyprojectsolutions.com   www.fastprojectmaterials.com     www.currentprojectmaterials.com

www.sweetprojectmaterials.com   www.softprojectmaterials.com  www.easyprojectstock.com

www.easyprojectmaterials.com.ng    www.easyprojectsmaterial.com

www.easyprojectsmaterials.com       www.easyprojectsmaterial.com.ng

www.easyprojectsmaterials.com.ng    http://projectdevelopersng.blogspot.com

http://myprojectsng.blogspot.com                         http://projectdeveloperng.blogspot.com

http://projetsoft.blogspot.com                                http://googleprojectsng.blogspot.com

http://ngtopicstop.blogspot.com                             http://googletopicsng.blogspot.com

http://myprojectng.blogspot.com                            http://ngtopics.blogspot.com

www.projectfilesng.blogspot.com                            www.projectfileng.blogspot.com

www.projectmaterials.blogspot.com                       www.projectmaterialsng.blogspot.com

www.projectmaterialng.blogspot.com                    www.projectstoreng.blogspot.com

www.projectstoresng.blogspot.com                         www.projectsstoresng.blogspot.com

www.projectworksng.blogspot.com                          www.projectsworksng.blogspot.com

www.projectbaseng.blogspot.com                             www.projectbasesng.blogspot.com

www.projectshareng.blogspot.com                           www.projectsharesng.blogspot.com

www.projectwriteupng.blogspot.com                       www.projectwriteupsng.blogspot.com

www.projectdocng.blogspot.com                               www.projectdocsng.blogspot.com

www.projecttextng.blogspot.com                               www.projecttextsng.blogspot.com

www.projecttestng.blogspot.com                               www.projecttestsng.blogspot.com

www.projectanswerng.blogspot.com                         www.projectanswersng.blogspot.com

www.projectsolutionsng.blogspot.com                     www.projectsolutionng.blogspot.com

www.projectengineng.blogspot.com                          www.projectenginesng.blogspot.com

www.projectcreationng.blogspot.com                        www.projectcreationsng.blogspot.com

www.projectlandng.blogspot.com                               www.projectlandsng.blogspot.com

www.projectworldng.blogspot.com                             www.projectworldsng.blogspot.com

www.projectglobeng.blogspot.com                              www.projectglobesng.blogspot.com

www.projectuniverseng.blogspot.com                         www.projectuniversalng.blogspot.com

www.projectideang.blogspot.com                                www.projectideasng.blogspot.com

www.projectbestng.blogspot.com                                www.projectbestsng.blogspot.com

www.projectbirthng.blogspot.com                                www.projectbirthsng.blogspot.com

www.projectcaseng.blogspot.com                                 www.projectcasesng.blogspot.com

www.projectmineng.blogspot.com                                 www.projectminesng.blogspot.com

www.projecttimeng.blogspot.com                                  www.projecttimesng.blogspot.com

www.projectwebng.blogspot.com                                    www.projectwebsng.blogspot.com

www.projectlinksng.blogspot.com                                 www.projectlinkng.blogspot.com

www.projectdigitalng.blogspot.com                               www.projectdigitalsng.blogspot.com

www.projectlanguageng.blogspot.com                          www.projectlanguagesng.blogspot.com

www.projectresultng.blogspot.com                                 www.projectresultsng.blogspot.com

www.projectadvertng.blogspot.com                                www.projectadvertsng.blogspot.com

www.projecthomeng.blogspot.com                                 www.projecthomesng.blogspot.com

www.projectproviderng.blogspot.com                            www.projectprovidersng.blogspot.com

www.projectpageng.blogspot.com                                   www.projectpagesng.blogspot.com

www.projecttoolng.blogspot.com                                     www.projecttoolsng.blogspot.com

www.projecttrendng.blogspot.com                                   www.projecttrendsng.blogspot.com

www.projectshopng.blogspot.com                                     www.projectshopsng.blogspot.com

www.projectsampleng.blogspot.com                                www.projectsamplesng.blogspot.com

www.projectclickng.blogspot.com                                     www.projectclicksng.blogspot.com

www.projectspotng.blogspot.com                                    www.projectspotsng.blogspot.com

www.projectprimeng.blogspot.com                                   www.projectprimesng.blogspot.com

www.projectvisibilityng.blogspot.com                            www.projectvisibilitysng.blogspot.com

www.projectcontentng.blogspot.com                             www.projectcontentsng.blogspot.com

www.projectdeliveredng.blogspot.com                           www.projectsdeliveredng.blogspot.com

www.projecttopng.blogspot.com                                      www.projecttopsng.blogspot.com

www.projectdownloadng.blogspot.com                           www.projectdownloadsng.blogspot.com

www.projectsystemng.blogspot.com                                www.projectsystemsng.blogspot.com

www.projectupdateng.blogspot.com                                 www.projectupdatesng.blogspot.com

www.projectstatementng.blogspot.com                            www.projectstatementsng.blogspot.com

www.projectsearchng.blogspot.com                                  www.projectsearchesng.blogspot.com

www.projectsetupngng.blogspot.com                                 www.projectsetupsng.blogspot.com

www.projectvariableng.blogspot.com                               www.projectvariablesng.blogspot.com

www.projectpaceng.blogspot.com                                      www.projectpacesng.blogspot.com

www.projectinfong.blogspot.com                                        www.projectinfosng.blogspot.com

www.projectindexng.blogspot.com                                      www.projectindexesng.blogspot.com

www.projecttrademarkng.blogspot.com                           www.projecttrademarksng.blogspot.com

www.projectauthorng.blogspot.com                                    www.projectauthorsng.blogspot.com

www.projectthingng.blogspot.com                                       www.projectthingsng.blogspot.com

www.projectageng.blogspot.com                                            www.projectagesng.blogspot.com

 

 

Tags:

7 years ago 0 Comments Short URL

MECHANICAL ENGINEERING PROJECT MATERIALS

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE:

WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953,08168759420

WE WILL THEN SEND PROJECT TOPICS AND MATERIALS IN POLITICAL SCIENCE , THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE

 

NOTE ALSO:

  WE WILL THEN SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE WITHIN 48 HOURS

JUST SEND YOUR EMAIL ADDRESS AND THE APPROVED TOPIC TO 08068231953, 08168759420

 

MECHANICAL ENGINEERING  PROJECT  MATERIALS 

 

1. AN ELECTRIC POP-CORN MACHINE
2. AUTOMOBILE MOTOR VEHICLE CONSTRUCTION
3. BENCH SHAPING MACHINE
4. CONSTRUCTION OF A MOBILE REFRIGERATOR
5. CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
6. CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG DANZA BUS
7. CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR
8. CONSTRUCTION OF A STANDARD BAKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)
9. CONSTRUCTION OF A VERTICAL FIRE TUBE BOILER
10. CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
11. CONSTRUCTION OF CELLOPHANE SEALING AND CUTTING MACHINE
12. CONSTRUCTION OF GRAIN GRINDING MACHINE
13. CONSTRUCTION OF TWO FACE GAS BURNER
14. DESIGN A ND FABRICATION OF A CONCRETE FLOOR TILES MOULDING MACHINE
15. DESIGN A ND FABRICATION OF A DUST EXTRACTOR
16. DESIGN AND CONSTRUCTION OF A 505 PEUGOT PISTON MOULD
17. DESIGN AND CONSTRUCTION OF A CREEP TESTING EQUIPMENT FOR LOW TEMPERATURE MELTING MATERIAL (PLASTICS)
18. DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
19. DESIGN AND CONSTRUCTION OF A SPIN DRYER
20. DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE
21. DESIGN AND CONSTRUCTION OF BAKING OVEN
22. DESIGN AND CONSTRUCTION OF METALLIC BOOKSHELF
23. DESIGN AND CONSTRUCTION OF PUNCH AND DIE FOR PRODUCTION OF CUPS
24. DESIGN AND FABRICATION OF 80CM X 70CM X 50CM MOBILE DEEP FREEZER
25. DESIGN AND FABRICATION OF A 12M3 MOBILE DEEP FREEZER
26. DESIGN AND FABRICATION OF A CREEP TESTING EQUIPMEMT
27. DESIGN AND FABRICATION OF A MECHANICAL LAWN MOWER
28. DESIGN AND FABRICATION OF A METAL BOOKSHELF
29. DESIGN AND FABRICATION OF A MOBILE DEEP FREEZER
30. DESIGN AND FABRICATION OF A MOBILE REFRIGERATOR.
31. DESIGN AND FABRICATION OF A PALM FRUIT DIGESTER
32. DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
33. DESIGN AND FABRICATION OF A PRINTING I BLOCK MACHINE
34. DESIGN AND FABRICATION OF AN ELECTRIC STOVE/OVEN
35. DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE
36. DESIGN AND FABRICATION OF CHILDREN SWING
37. DESIGN AND FABRICATION OF CORN SHELLING MACHINE
38. DESIGN AND FABRICATION OF CREEP MATERIAL TESTING EQUIPMENT
39. DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.
40. DESIGN AND FABRICATION OF WOOD LATHE MACHINE
41. FABRICATION OF A FOLDABLE CAMP BED
42. FABRICATION OF A METALLIC BOOKSHELF

43. FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
44. FABRICATION OF A STANDARD WHEELBARROW
45. FABRICATION OF BENCH SHEARING MACHINE
46. FABRICATION OF METAL SHELF
47. FABRICATION OF REFRIGERATOR (DEEPFREEZE)
48. NYLON CUTTING AND SEALING MACHINE
49. RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.
50. REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO
51. REHABILITATION OF INSTITUTE’S GROUP BUS.
52. REPAIR AND FABRICATION OF A REFRIGERATOR SYSTEM
53. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING
54. REPAIR AND REHABILITATION OF A FACULTY AIR-CONDITIONER IN ENGR. OMEJE’S OFFICE IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (IMT), ENUGU.
55. REPAIR AND REHABILITATION OF A FACULTY REFRIGERATOR
56. REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER
57. REPAIR AND REHABILITATION OF A FAULTY AIR- CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE AT INSTITUTE OF MANAGEMENT AND TECHNOLOGY (IMT) ENUGU
58. REPAIR AND REHABILITATION OF A FAULTY AIR-CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T.) ENUGU
59. REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER
60. REPAIR AND REHABILITATION OF A ROOM AIR-CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT.
61. REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
62. REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE
63. REPAIR OF A DAMAGED REFRIGERATOR
64. REPAIR OF A FAULTY REFRIGERATOR IN THE MECHANICAL ENGINEERING DEPARTMENT OF THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU
65. REPAIR OF AN AIR CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT
66. REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
67. THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER.
68. THE CONSTRUCTION AND FABRICATION OF A METAL BOOKSHEET
69. THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
70. THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE
71. THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE

72. THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE
73. THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
74. THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
75. THE FABRICATION OF A PRESSURIZED KEROSENE OVEN
76. THE FABRICATION OF A SINGLE FACE PRESSURIZED KEROSENE COOKER.
77 FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
78 FABRICATION OF METAL SHELF
79 RURAL MANAGEMENT AS A STRATEGY FOR REDUCING RURAL – URBAN MIGRATION IN NIGERIA (A CASE STUDY OF ISHIELY LOCAL GOVERNMENT AREA OF EBONYI STATE)
80 CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
91 DESIGN A ND FABRICATION OF A DUST EXTRACTOR
92 CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
93 DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
94 DESIGN AND CONSTRUCTION OF A SPIN DRYER
95 CONSTRUCTION OF A WOODEN BOOK SHELF
96 DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE
97 REPAIR OF A DAMAGED REFRIGERATOR
98 CONSTRUCTOIN OF AN OPEN STEAM DISTILLATOIN COLUMN
99 THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
100 DESIGN AND CONSTRUCTION OF BAKING OVEN
101 REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
102 REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE
103 CONSTRUCTION OF PROPELLER AGITATOR
104 CONSTRUCTION OF TWO FACE GAS BURNER
105 REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
106 AN EVALUATION OF PROPERTY RATING PRACTICE IN NIGERIA
(A CASE STUDY OF ENUGU NORTH LOCAL GOVERNMENT AREA)
107 MANAGEMENT OF COMMERCIAL PROPERTIES IN NIGERIA (A CASE STUDY AT AWKA METROPOLIS)
108 FABRICATION OF A FOLDABLE CAMP BED
109 THE PROBLEM OF SOLID WASTE MANAGEMENT IN ENUGU METROPOLIS
A CASE STUDY IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) CAMPUS III ENUGU
110 REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER
111 REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO
112 DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.
113 DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
114 THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
115 THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
116 A COMPARATIVE ANALYSIS OF RENTAL VARIATION IN RESIDENTIAL AND COMMERCIAL PROPERTIES IN NIGERIA (A CASE STUDY OF OGUI NEW LAYOUT ENUGU)
117 DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER
118 PRODUCTION AND ACCEPTABILITY STUDIES OF MALTED SORGHUM (SORGHUM BICOLOR) BISCUIT
119 CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)
120 RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.
121 DESIGN AND FABRICATION OF WOOD LATHE MACHINE
122 POLLUTANTS IN ENUGU URBAN AN EMISSION INVENTORY OF POLLUTANTS IN ENUGU URBAN
123. THE RATE OF BLEACHING OF PALM OIL WHITE COAL.
124 PRODUCTION OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.
125 CHARACTERIZATION OF SOME BRANDED MOTOR OIL
126 DEVELOPING THE PROCESS OF PLASTIC INDUSTRY IN NIGERIA
127 PRODUCTION OF HIGH QUALITY BODY PERFUME
128 PROCESS DEVELOPMENT IN THE PRODUCTION OF VEGETABLE OIL FROM LOCAL RAW MATERIAL
129 COMPARISM RESEARCH ON SOAP AND DETERGENT POWDER
130 PRODUCTION OF VEGETABLE OIL USING ENUGU COAL
131 NEW FORMULAE FOR ESTIMATING FIXED INVESTMENT CAPITAL COSTS
132 PRODUCTION OF HOUSE HOLD INSECT- KILLER
133 RESEARCH PROJECT ON BLEACHING OF PALM OIL WITH NIGERIA CLAY
134 MODIFICATION OF MODEL SEDIMENTATION TANK
135 CONSTRUCTION OF METAL MOULD FOR SOAP PRODUCTION
136 CONSTRUCTION OF A SIMPLE METALLIC MOULD

 

 

 

 

 

 

 

 

 

 

AFFILIATE LINKS

 

www.uniproject.com.ng
www.uniprojects.com.ng
www.uniprojectz.net
uni-project.net
hiwriters.com.ng
hiwriter.com.ng
hiwriters.net
hiwriter.net
jamtechproject.com.ng
jamtechprojects.com.ng
jamtechproject.net
jamtechprojects.net
www.easyprojectmaterials.com
www.easyprojectsolutions.com
www.worldofnolimit.com
www.easyprojectmaterials.com.ng
www.easyprojectsmaterials.com.ng
www.easyprojectsmaterials.com
www.easyprojectsmaterial.com
www.easyprojectsmaterial.com.ng
www.easyprojectmaterial.com.ng
www.projectmaterial.com.ng
www.projectmaterials.com.ng
www.projectmaterials.com
www.myprojectmaterial.com.ng
www.myprojectmaterials.com
www.researchprojectmaterial.com
www.researchprojectmaterials.com

www.nairaproject.com.ng

www.nairaprojects.com.ng

www.nairaproject.net

www.nairaprojects.net

 

 

 

 

 

 

 

Tags:

7 years ago 0 Comments Short URL

MECHANICAL ENGINEERING PROJECT MATERIALS

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE:

WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953,08168759420

WE WILL THEN SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE

 

NOTE ALSO:

IF YOU ALREADY HAVE AN APPROVED PROJECT TOPIC THAT IS NOT ON OUR WEBSITE,WE CAN ALSO DEVELOP IT FOR YOU.WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE WITHIN 48 HOURS

JUST SEND YOUR EMAIL ADDRESS AND THE APPROVED TOPIC TO 08068231953, 08168759420

 

MECHANICAL ENGINEERING PROJECT  MATERIALS

 

  • A new Slip Line Theory For Orthogonal Cutting Mech Paper Presentation
  • A NOVEL REAR END COLLISION ACCIDENT AVOIDANCE SYSTEM WITH DYNAMIC SPEED GOVERNOR
  • ABRASIVE JET MACHINING AND STUDY OF PROCESS PARAMETERS Mtech Mech Seminar
  • ACTIVE MAGNETIC BEARINGS (AMB) Mechanical Final Year Project
  • ADVANCED FINE FINISHING PROCESSES Mechanical Paper
  • ADVANCEMENTS IN TECHNOLOGY AND THEIR IMPLICATIONS ON ENTREPRENEURSHIP Mechanical
  • AIR DEFENSE GUN Mech Project
  • Air Driven Engine Mechanical Engineering Final Year Project Report
  • Air-conditioning and Air-conditioning System Design AutoCad Mechanical Project
  • AirCraft Auto Pilot Roll Control System Mechanical Project Presentation
  • ANTI THEFT WHEEL LOCKING SYSTEM Mechanical Project Abstract
  • Automatic Pneumatic Bumper For Four Wheeler Final Year Mech Project
  • AUTOMATIC PNEUMATIC HAMMER
  • AUTOMATIC SOLAR WATER PUMPING SYSTEM
  • ABRASIVE JET MACHINE
  • ABRICATION OF HYBRID VEHICLE
  • AC MOTOR SPEED CONTROLLING SYSTEM USING PWM TECHNIQUES
  • ACCIDENT PREVENTER FOR CUTTING MACHINE
  • AGRICULTURAL MOTOR PUMP RUNNING USING SOLAR POWER
  • AGRICULTURAL PADDY CLEANING SYSTEM USING SOLAR POWER
  • AIR ENGINE
  • AIR LEAK DETECTOR
  • ANTI-LOCK BRAKING SYSTEM
  • ANTILOCK BRAKING SYSTEM (ABS)
  • AUTO CLUTCH FOR AUTOMOBILE
  • AUTO FEED PNEUMATIC VICE
  • AUTO FEED PNEUMATIC VICE
  • AUTO INDEXING GEAR CUTTING ATTACHMENT FOR PNEUMATIC SHAPING MACHINE
  • AUTOMAIC TEMPERATURE CONTROLLER WITH COOLING SYSTEM
  • AUTOMAIC TRANSFORMER HEAT REDUCTION SYSTEM
  • AUTOMATIC BOTTLE WASHING MACHINE
  • AUTOMATIC BRAKE FOR HILLS STATION
  • AUTOMATIC BREAK FAILURE INDICATOR AND ENGINE OVER HEATING ALARM
  • AUTOMATIC BREAK FAILURE INDICATOR AND ENGINE OVER HEATING ALARM
  • AUTOMATIC CAR PARKING SYSTEM
  • AUTOMATIC CAR PARKING SYSTEM
  • AUTOMATIC CONVEYER WITH PNEUMATIC REJECTION SYSTEM
  • AUTOMATIC DIFFERENTIAL UNIT LOCKING SYSTEM
  • AUTOMATIC DISTANCE MEASUREMENT AND BRAKING SYSTEM USING ULTRASONIC
  • AUTOMATIC DOUBLE AXIS WELDING MACHINE
  • AUTOMATIC DRILLING AND TAPPING MACHINE
  • AUTOMATIC DRINKING WATER SAVING SYSTEM FOR MUNICIPAL WATER
  • AUTOMATIC DRUCKEN DRIVE AVOIDING SYSTEM
  • AUTOMATIC ELECTRO HYDRAULIC BRAKE
  • AUTOMATIC ELECTRO MAGNETIC CLUTCH
  • AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER
  • AUTOMATIC FOOT DUST CLEANING MACHINE
  • AUTOMATIC GEAR CHANGER
  • AUTOMATIC GEAR CHANGER
  • AUTOMATIC HAND BREAK RELEASE
  • AUTOMATIC HEAD LIGHT DIM/BRIGHT CONTROLLER
  • AUTOMATIC HEAD LIGHT DIM/BRIGHT CONTROLLER
  • AUTOMATIC HYDRAULIC PIPE VICE
  • AUTOMATIC INTELLIGENT BRAKING SYSTEM
  • AUTOMATIC LUBRICATION SYSTEM
  • AUTOMATIC MULTIPLE TRANSFORMER FAULT DETECTION AND PRODUCTION SYSTEM
  • AUTOMATIC PHENUMATIC GRINDING MACHINE
  • AUTOMATIC PNEUMATIC BUMPER FOR FOUR WHEELER
  • AUTOMATIC PNEUMATIC CAN CRUSHER WITH CONTENEOUS FEEDING SYSTEM
  • AUTOMATIC PNEUMATIC GLASS HOLE DRILLING MACHINE
  • AUTOMATIC PNEUMATIC JACK
  • AUTOMATIC PNEUMATIC PRINTING PRESS
  • AUTOMATIC PNEUMATIC STAND FOR TWO WHEELER
  • AUTOMATIC PNEUMATIC VICE AND JACK
  • AUTOMATIC PNEUMATIC WATER PUMPING SYSTEM
  • AUTOMATIC PNEUUMATIC GLASS GRINDING MACHINE
  • AUTOMATIC POURING MECHANISM FOR BOUNDRY
  • AUTOMATIC RAILWAY TRACK CRACK DETECTING VEHICLE
  • AUTOMATIC RAILWAYS SIGNALLING SYSTEM
  • AUTOMATIC RAIN OPERATED WIPER
  • AUTOMATIC REVERSE BRAKING SYSTEM FOR AUTOMOBILE
  • AUTOMATIC SCRAP COLLECTING VEHICLE
  • AUTOMATIC SOLAR IRRIGATION SYSTEM
  • AUTOMATIC STEERING CONTROL MECHANSIM
  • AUTOMATIC TRAFFIC AND STREET LIGHT CONTROLLER
  • AUTOMATIC VEGETABLE CUTTING MACHINE
  • AUTOMATIC VEHICLE ACCIDENT PREVENTION SYSTEM
  • AUTOMATIC WELDING MACHINE
  • AUTOMATIC WELDING ROBOT
  • AUTOMATIC WHEEL CHAIR
  • AUTTOMATIC SPRING END GRINDING MACHINE
  • BUTTON OPERATED ELECTRO-MAGNETIC GEAR SHIFTING SYSTEM FOR TWO WHEELER
  • CAR AUTOMATION WITH SECURITY SYSTEM
  • CATELITE CONVERTER FOR AUTOMOBILE
  • CHAPATHI MAKING MACHINE
  • CHAPATHI MAKING MACHINE
  • COIN SEPERATOR MACHINE
  • Coir Making Machine
  • COLD CHAMBER DIE CASTING MACHINE
  • COLD CHAMBER DIE CASTING MACHINE
  • COMPRESSED AIR PRODUCTION USING VEHICLE SUSPENSOR
  • CONTOUR ATTACHMENT FOR LATHE
  • CONTOUR ATTACHMENT FOR LATHE
  • CORDLESS HOME SCURITY SYSTEM
  • CYLINDRICAL TAPPING MACHINE
  • DIGITAL BLOOD PRESSURE INDICATOR
  • DIGITAL FUEL LEVEL INDICATOR
  • DIGITAL GEAR LEVEL INDICATOR
  • DOUBLE EFFECTING SOLAR COOKER
  • ECCENTRIC SHEER CUTTING MACHINE
  • ECHO SOUNDER
  • EFFICIENCY INCREASING SYSTEM BY USING PREHEATING METHOD
  • EFFICIENCY INCREASING SYSTEM BY USING PREHEATING METHOD
  • ELECTRICAL POWER GENERATION USING RAILWAY TRACK
  • ELECTRICAL POWER GENERATION USING SPEED BRAKE
  • ELECTRICAL POWER GENERATION USING THERMAL POWER PLANT
  • ELECTRICAL STEERING SYSTEM IN AUTOMOBILE
  • ELECTRICAL STEERING SYSTEM IN AUTOMOBILE
  • ELECTRICAL STEERING SYSTEM IN AUTOMOBILE
  • ELECTRO-HYDRAULIC SYSTEM FOR AUTOMATION
  • ELECTRO-MAGNATIC BRAKING SYSTEM FOR AUTOMOBILE
  • ELECTRONIC FUEL INJECTOR FOR TWO WHEELER
  • ELECTRONIC HACK SAW MACHINE
  • ELECTRONIC HACK SAW MACHINE
  • ELECTRONIC IGNITION SYSTEM FOR AUTOMOBILE
  • EMERGENCY BRAKING SYSTEM
  • EMERGENCY BRAKING SYSTEM
  • EMISSION CONTROL OF DIESEL ENGINE
  • ENGINE MANAGEMENT AND AUTOMATIC COOLING FAN OPERATENG SYSTEM
  • FABRICATION OF CAM VICE
  • FABRICATION OF DUAL FUEL ENGINE
  • FABRICATION OF DUAL SIDE HYDRAULIC VEHICLE LIFTING SYSTEM
  • FABRICATION OF DUAL SIDE WATER PUMPING SYSTEM
  • FABRICATION OF ELECTRICAL SCREW JACK
  • FABRICATION OF MECHANICAL CRANE
  • FABRICATION OF MILLER CUTTER WITH COMPRESSED AIR
  • FABRICATION OF MOTORISED COIN SEPARATER
  • FABRICATION OF PIPE CUTTING MACHINE
  • FABRICATION OF PNEUMATIC DRILL JIG
  • FABRICATION OF PNEUMATIC PAPER CUP MAKING MACHINE
  • FABRICATION OF TWIN CYLINDER LOW PRESSURE BOILER
  • FABRICATION OF WIND MILL WITH TAIL SYSTEM
  • FINGER PRINT ATTENDANCE SYSTEM
  • FLOOR CLEANING MACHINE
  • FOOT STEP POWER GENERATION SYSTEM
  • FRICTION WELDING MACHINE FOR ALUMINIUM
  • FUEL INJECTOR TESTING EQUIPMENT
  • FUEL INJECTOR TESTING EQUIPMENT
  • FULLY AUTOMATED DRILLING MACHINE
  • FUZZY LOGIC BASED PC-TO-PC COMMUNICATION USING INFRARED/LASER BEAM
  • GASKIT FOR TWO WHEELER
  • GRID INTERACTIVE INVERTER
  • GROUND DRILLER
  • GROUND DRILLER
  • HYBRID SYSTEM FOR HOME
  • HYDRAULIC BREAK SHOW RIVETING MACHINE
  • HYDRAULIC BREAK SYSTEM WITH BREAK FAILURE INDICATOR
  • HYDRAULIC CYLINDER LINER PULLER
  • HYDRAULIC DISC BREAK
  • HYDRAULIC FORK LIFT
  • HYDRAULIC FORK LIFT
  • HYDRAULIC HYBRID SYSTEM
  • HYDRAULIC OPERTAED V TYPE BENDING MACHINE
  • HYDRAULIC PIPE BENDING MACHINE
  • HYDRAULIC VICE WITH POWER PACK
  • HYDRO POWER PLANT
  • INCREASING EFFICIENCY OF THE PETROL ENGINE USING TURBO CHARGER
  • INSPECTION CONVEYOR
  • INTELLIGENT ACTIVE SUSPENSING SYSTEM FOR TWO WHEELER
  • INTELLIGENT ACTIVE SUSPENSING SYSTEM FOR TWO WHEELER
  • INTELLIGENT MOTORIZED HYDRAULIC JACK
  • INTELLIGENT MOTORIZED HYDRAULIC JACK
  • INTELLIGENT MOTORIZED WALL PAINTING CRANE
  • INVOLUTE GEAR PROFILE ERROR DETECTOR
  • LATHE COOLENT PUMP WITH FITTING ARRANGMENT
  • LATHE COOLENT PUMP WITH FITTING ARRANGMENT
  • MAGNETIC BEARING
  • MAGNETIC SHOCK ABSORBER
  • MICROCONTROLLER BASED AUTOMATIC POWER THEFT IDENTIFIER
  • MICROCONTROLLER BASED AUTOMATIC VEHICLE OVER SPEED INDICATION AND CONTROLLING SYSTEM
  • MICROCONTROLLER BASED DIGITAL LOCKING SYSTEM FOR TWO WHEELER
  • MICROCONTROLLER BASED MOTOR SPEED MONITORING SYSTEM
  • MICROCONTROLLER BASED RAILWAYS ACCIDENT AVOIDING SYSTEM
  • MICROPROCESSOR CONTROLLED THERMOMETER
  • MILLING ATTACHMENT FOR LATHE
  • MINI HYDRAULIC PRESS
  • MINI ROBOT CAR
  • MODERN MIRROR CUTTING MACHINE
  • MOTORISED HYDRAULIC JACK
  • MOTORIZED HYDRAULIC JACK
  • MOTORIZED JIB CRANE
  • MOTORIZED SCREW JACK
  • MOTORIZED SHEET METAL ROLLING MACHINE
  • MOTORIZED WHEEL CHAIR
  • MULTI DRILL HOLDER
  • MULTI FUEL SINGLE CYLINDER ENGINE RUN BY PETROL AND LPG GAS
  • MULTI SPEED GEAR BOX
  • MULTI SPEED GEAR BOX
  • MULTI-DRILL HOLDER
  • MULTI-DRILL HOLDER
  • MULTI-NUT TIGHTNER
  • MULTIPOINT GREASE GUN
  • Multi-purpose Cutter
  • NANO TYPE WEIGHT LESS BIKE RUN BY 20 CC SINGLE PISTON PETROL ENGINE
  • NOISE CONTROL OF TWO STROKE PETROL ENGINE USING AQUA SILENCER
  • NON-CONVENTIONAL AIR COMPRESSOR
  • NUMERICAL CONTROLLED GATE LOCKING SYSTEM
  • OIL PUMP TESTING EQUIPMENT
  • OVER SPEED INDICATION AND AUTOMATIC ACCIDENT AVOIDING SYSTEM IN FOUR WHEELER
  • OVER SPEED INDICATION AND BREAKING SYSTEM
  • PACKING CONTROL MACHINE FOR INDUSTRIAL APPLICATIONS
  • PANTOGRAPH UNIVERSAL GAS CUTTING MACHINE
  • PAPER CUP MAKING MACHINE
  • PC BASED PICK AND PLACE ROBOT
  • PC BASED WIRELESS ROBOT
  • PEDAL WASHING MACHINE
  • PEDESTAL SPOT WELDING MACHINE
  • PELTON WHEEL TURBINE
  • PHENUMATIC AUTO FEED DRILLING MACHINE
  • PIPE THREAD CUTIING MACHINE
  • PNEUMATIC AUTO FEED PUNCHING AND RIVETING MACHINE
  • PNEUMATIC AUTO GEAR CHANGER
  • PNEUMATIC BEARING DISMANTLER
  • PNEUMATIC DOUBLE AXIS JCB MODEL
  • PNEUMATIC INJECTION MOULDING MACHINE
  • PNEUMATIC JACK FOR FOUR WHEELERS
  • PNEUMATIC LEAF CUP MAKING MACHINE
  • PNEUMATIC MACHINING TIME REDUCTION IN SHAPER
  • PNEUMATIC MATERIAL HANDLING EQUIPMENT
  • PNEUMATIC MULTI-PURPOSE GRINDER
  • PNEUMATIC MULTI-PURPOSE PRESS
  • PNEUMATIC PICK AND PLACE ROBOT
  • PNEUMATIC QUICK RETURN MECHANISM
  • PNEUMATIC SLOTTING MACHINE
  • PNEUMATIC SLOW AND HIGH SPEED DRILLING MACHINE
  • PNEUMATIC THREE AXIS MODERN TRILER
  • PORTABLE WATER SERVICE UNIT
  • POWER GENERATION USING VERTICAL AXIS WINDMILL SYSTEM
  • POWER SAVING SYSTEM FOR LATHE
  • QUICK LIFTING JACK WITH GEAR ARRANGMENT
  • RADIAL PLUNGER PUMP
  • REMOTE CONTROLLED VIDEO ANALYSING ROBOT
  • REMOTE OPERATED PNEUMATIC CRANE
  • ROTARY GEAR PUMP
  • ROTARY KALLER
  • ROTARY VACUUM PUMP
  • SAND COLLECTING MACHINE
  • SELF CENTRING FOUR JAW CHUCK
  • SENSOR OPERATED AUTOMATIC RAMMING MACHINE
  • SHEET BENDING AND BEND REMOVING MECHINE
  • SHEET STRAIGHTENING MACHINE
  • SHELL AND TUBE HEAT EXCHANGER
  • SIMPLE INDEXING BY STEPPER MOTOR IN SHAPING MACHINE
  • SLOTTING ATTACHMENT IN DRILLING MACHINE
  • SMARTCARD BASED PREPAID ELECTRICITY SYSTEM
  • SOLAR AGRICULTURAL PUMPING SYSTEM
  • SOLAR AIR CONDITIONER
  • SOLAR AIR COOLER
  • SOLAR AUTOMATIC RAILWAY TRACK CRACK DETECTING VEHICLE
  • SOLAR AUTOMOBILE AIR COOLER
  • SOLAR CYCLE
  • SOLAR HYBRID CAR
  • SOLAR HYBRID CAR
  • SOLAR MULTI-PURPOSE SPRAYER
  • SOLAR PANEL AUTO TRACKING SYSTEM
  • SOLAR POWERED AUTO CHARGING GRINDING MACHINE
  • SOLAR POWERED HEAD LIGHT DIM/BRIGHT CONTROLLER
  • SOLAR REFRIGERATION SYSTEM
  • SOLAR THERMO ELECTRIC AIR CONDITIONER
  • SOLAR TRAIN
  • SOLAR WATER CUM ROOM COOLING SYSTEM
  • SOLAR SEED SPRAYER
  • SPARK PLUG TESTER AND CLEANER
  • SPRING SEPARATOR MACHINE
  • SPRING TESTING MACHINE
  • ELECTRICAL STEERING SYSTEM IN AUTOMOBILE
  • TAPPING ATTACHMENT IN RADIAL DRILLING MACHINE
  • THERMO ELECTRIC REFRIGERATOR
  • FABRICATION OF TURBO SUPER CHARGER
  • TWO ENGINE SYNCHRONIZATION FOR FOUR WHEELER
  • EMBEDDED BASED TWO WHEELER AUTOMATION WITH SECURITY SYSTEM
  • AUTOMATIC TYRE PRESSURE INFLATION SYSTEM
  • UNAIDED GUIDED VEHICLE
  • UNIVERSAL TAPPING MACHINE
  • UNIVERSAL TOOL GRINDING MACHINE
  • VACUUM CONVEYOR FOR INDUSTRIAL APPLICATION
  • VERTICAL LATHE
  • MICROCONTROLLER BASED VOICE CONTROLLED ROBOT
  • AUTOMATIC WALL PAINTING ROBO
  • WASTE CHILL RECOVERY HEAT EXCHANGER
  • WATER COOLER CUM AIR CONDITIONER
  • WATER FUEL ENGINE
  • WIND ENERGY VEHICLE
  • WIND MILL POWER GENERATION SYSTEM
  • WIRELESS TYRE PRESSURE MONITORING SYSTEM
  • ACCIDENT PREVENTER FOR PUNCHING MACHINE
  • SOLAR THREE WHEELER CYCLE FOR PHYSICALLY HANDICAPED PERSON
  • SOLAR WATER HEATER WITH NATURAL SUN HEAT
  • WATER COOLER CUM HEATER
  • WATER FUEL ENGINE
  • WINDMILL WATER PUMPING SYSTEM RECIPROCATING TYPE
  • AUTOMATION OF PNEUMATIC SHEET METAL BENDING MACHINE Mechanical Project
  • KEY CONTROLLED-FORKLIFTER
  • CNC MACHINES IN VARIOUS FABRICATION PROCESSES
  • BIODIESEL IN DIESEL ENGINES Latest Mechanical Project
  • BLACK BOX FOR VEHICLES Micro Controller Mechanical Project
  • BOILER EFFICIENCY AND COOLING TOWER EFFICIENCY Mechanical Final Year Project Report
  • Bus Rapid Transit System Mechanical Engineering Project Report
  • Coconut dehusking Machine Mechanical Engineering Project
  • Construction of Test Apparatus to Identify Different Types of Wood Mechanical Project
  • Control of Boiler Operation using PLC-SCADA Mechanical 2011 Project
  • Cool Air Equals Power TURBO INTERCOOLER Engineering Mechanical Project Report
  • CRYOGENIC ROCKET ENGINE HYDROGEN FUEL SYSTEM
  • Department of Mechanical Engineering Project Abstract on DEMONSTRATION OF COOLING EFFECT USING SOUND WAVES
  • DEPARTMENT OF MECHATRONICS AND MECHANICAL ENGINEERING GEAR SHIFTING PROJECT
  • Dept of Mechanical Engineering Biomechatronic Seminar Project Report
  • Design & Execution of Hydraulic Operated Fixture Mech Project Documentation
  • Design & Fabrication of a Tension Less Two Wheeler Bike Mechanical Mini Project
  • DESIGN & FABRICATION OF SUSPENSION SYSTEMS Mech Project Report
  • DESIGN & FABRICATION OF SUSPENSION SYSTEMS Mech Project Report
  • Design Development & Fabrication of Hydraulic Escalator Project Report
  • Design Of An Auto-Tilting Car Mechanical Project Report
  • Design of Tesla Turbine Mechanical Engineering Project Report
  • Effect of Rim Thickness on Bending Stresses in Low Addendum Large Spur Gears Project Paper
  • Electricity Generation from Speed Breaker Mechanical Project
  • Electro Magnetic Crane Mechanical Project Report
  • Electronic magnetic Forming (EMF) Dept Of Mechanical Engg Final Year Project
  • EMISSIONS REDUCTION USING HYDROGEN FROM PLASMATRON FUEL CONVERTERS
  • Fabrication Of Vertical AXIS Wind Turbine & Horizontal Axis Wind Mill
  • FEA of Al-SiC Composite in Engine Valve Guides Mech Project Report
  • Fly-by-wireless-Power-by-wire-Fly-by-optics-Mechanical-Seminar
  • Fuel Injection in the Compression Ignition Engine Project Presentation
  • Function Of Mechanical Braking System Final Year Abstract
  • GAS KIT FOR TWO WHEELER Mechanical Mini Project
  • GAS TURBINE BLADES ROTOR BLADE USING NICKEL BASED SUPER ALLOY
  • GPS AND WEAPON Technology Mechanical Seminar Topic
  • GREEN NANOTECHNOLOGY IN AUTOMOBILES Mechanical Student Project
  • HEAT TRANSFER PERFORMANCE IN 3D INDUCED FINNED HEAT PIPE PROJECT PPT
  • Hydraulic Pumps and Pressure Regulation Mechanical Engineering Project
  • Hydrogen Fuel Cell Operated Remote Control Car Btech Mechanical Project
  • Independent Suspension System Dept of Mechanical Engineering Final Year Project
  • INFLUENCE OF SHAPE OF DIRECTRIX ON THE COST OF RC CYLINDRICAL AND CONOIDAL SHELLS
  • Kinematics Based on Four Bar Linkage BE Mechanical Seminar Topic & Project Report
  • Light Following Robot Mechanical Technical Seminar Report
  • Magnetic Abrasive Finishing Process Mechanical Project
  • MAGNETIC BRAKING SYSTEM Mechanical Technical Presentation
  • Manufacturing Of PVC Pipe Bachelor Of Technology Mechanical Engineering Project
  • Mech Major Project on Design of Mobile Phone Holder for Automobile Steering Wheel
  • Mech Project & PPT on DESIGN AND ANALYSIS OF A TWO STROKE PETROL ENGINE TEST RIG
  • Mech Project on Automatic Temparature Control of Vaccum Brazing Furnace by using PLC
  • Mechanical Final Year Project on Design and Fabrication of Tyre Coupling
  • Mechanical Final Year Project Report on Design of Boiler Stack
  • Mechanical Project Documentation on Forged Steel and Powder Metal Connecting Rods
  • Mechanical Project on Auto Turning Fuel Valve
  • Mechanical Project on Future Electrical Steering System
  • Mechanical PROJECT REPORT ON CENTER JACK FOR CARS
  • Mechanical Project Report on Small Scale Industries (Automobile control cables)
  • Mechanical Projects On Modeling And Fatigue Analysis Of Automotive Wheel Rim
  • MECHANICAL STUDENT PROJECT ON CNC MACHINES
  • Mechatronics Mechanical 2012 Project Document
  • Mercedes Benz Project report For Mechanical final Year Students
  • METHODS OF IMPROVING PERFORMANCE OF THE GAS TURBINE Mech Document
  • Modeling of Armature Controlled DC Motor Using MATLAB Project Report
  • MODERNIZATION IN RAILWAYS Mechanical Engineering Project
  • MS BAR AND MS FLAT SMALL SCALE INDUSTRY PROJECT Report For Mechanical Branch
  • MTech Mechanical Project Report on Failure Analysis of Shell and Tube Heat Exchanger
  • NON CONVENTIONAL SOURCES OF ENERGY Mechanical Project Ideas
  • Numerical Control Machine Btech Mechanical Engineering Project
  • OPTIMAL BLENDING OF POLANGA OIL WITH DIESEL IN CI ENGINE USING ARTIFICIAL NEURAL NETWORKS
  • OPTIMUM DESIGN OF AN ACOUSTIC ENCLOSURE FOR DIESEL GENERATOR
  • PIEZOELECTRIC CAR Mechanical Project Idea
  • PLANER MILLING MACHINE ACCOMMODATED WITH DRILL HEAD
  • PLASMA ARC WELDING AND MACHINING Project Reports
  • Power Generation Using Speed Breakers And Efficient Use of Energy
  • Project on DESIGN FABRICATION AND PERFORMANCE EVALUATION OF GARDEN TILLER
  • Project Report on COST EFFECTIVENESS OF MINERAL WOOL INSULATION and PERLITE INSULATION
  • PROJECT REPORT ON DESIGN AND FABRICATION OF PLATE FREEZER
  • PROJECT REPORT ON DESIGN AND FABRICATION OF PULSE TUBE REFRIGERATION SYSTEM
  • PROJECT REPORT ON STUDY OF QUALITY EQUIPMENTS
  • Project Report on Tribological and Mechanical properties of Metal Bearings
  • QUASI-ISOTHERMAL EXPANSION ENGINE FOR Cryogenic Automotive Propulsion
  • RADIAL PISTON ENGINE Mechanical Final Student Project
  • REAL TIME SEQUENCE CONTROL SYSTEM FOR MACHINES
  • Regenerative Braking System Project For Mechanical Students
  • REMOTE CONTROLLED ELECTRICALLY OPERATED HYDRAULIC JACK
  • REMOTE OPERATED FORK LIFT Btech BE Mechanical Final Report
  • Robotic ARM Control Through Internet Lan for Patient Operation
  • ROBOTIC ARM Mechanical Robotics Projects
  • ROBOTIC TROLLEY FOR MATERIAL HANDLING
  • SAFETY AIRBAGS IN CARS Mech Project report
  • Sheet Metal Design Mechanical Project Report
  • SIMPLE MAGNETIC LEVITATION TRAIN Btech Mech Project
  • Solar Sails Mech Project Report for Students
  • SPEED CONTROL OF BLDC MOTOR USING SINUSOIDAL PWM USING FPGA MECH PROJECT
  • Steel Company Modernization Mechanical Project Work
  • STRUCTURAL PROPERTIES AND CHARACTRIZATION ISSUES OF CLAY BASED HYBRID NANOCOMPOSITES
  • Submarines Mech Project Pdf
  • Synthetic Oil Technology Mech Projects Idea
  • The potential for generation of hydroelectric power using the Jhimruk river
  • THE PROBLEM OF CONTROLLING FOUR-STROKE ENGINES
  • Vehicle Gas Detection With Automatic Safety Warning System Project
  • Weapon Technology & Global Positioning System (GPS)

 

 

 

 

 

 

AFFILIATE LINKS:

 

www.easyprojectmaterials.com

www.easyprojectsolutions.com

www.worldofnolimit.com

www.nairaproject.com.ng

www.nairaprojects.com.ng

www.nairaproject.net

www.nairaprojects.net

www.uniproject.com.ng
www.uniprojects.com.ng
www.uniprojectz.net
uni-project.net
hiwriters.com.ng
hiwriter.com.ng
hiwriters.net
hiwriter.net
jamtechproject.com.ng
jamtechprojects.com.ng
jamtechproject.net
jamtechprojects.net
www.easyprojectmaterials.com
www.easyprojectsolutions.com
www.worldofnolimit.com
www.easyprojectmaterials.com.ng
www.easyprojectsmaterials.com.ng
www.easyprojectsmaterials.com
www.easyprojectsmaterial.com
www.easyprojectsmaterial.com.ng
www.easyprojectmaterial.com.ng
www.projectmaterial.com.ng
www.projectmaterials.com.ng
www.projectmaterials.com
www.myprojectmaterial.com.ng
www.myprojectmaterials.com
www.researchprojectmaterial.com
www.researchprojectmaterials.com

http://projstuf.blogspot.com.ng/

http://highwriter.blogspot.com.ng/

http://nairaprojects.blogspot.com.ng/

http://jamtechprojects.blogspot.com.ng/

http://preshstore.blogspot.com.ng/

http://laitosproject.blogspot.com.ng/

http://educprojects.blogspot.com.ng/

http://projectsalesng.blogspot.com.ng/

http://projstoc.blogspot.com.ng/

http://projectstreetng.blogspot.com.ng/

http://eazyprojectsmaterial.blogspot.com.ng/

http://eazyprojectsmaterials.blogspot.com.ng/

http://easeprojectsmaterials.blogspot.com.ng/

http://easeprojectmaterial.blogspot.com.ng/

http://easyprojectsmaterials.blogspot.com.ng/

http://mastersprojectmaterials.blogspot.com.ng/

http://easyprojectsmaterial.blogspot.com.ng/

http://projectchaptersng.blogspot.com.ng/

http://easeprojectmaterials.blogspot.com.ng/

http://easeprojectsmaterial.blogspot.com.ng/

http://easzprojectmaterial.blogspot.com.ng/

http://easzprojectmaterial.blogspot.com.ng/

http://projectchapters.blogspot.com.ng/

http://academicprojectworld.blogspot.com.ng/

http://projectsng.blogspot.com.ng/

http://projectfilesng.blogspot.com.ng/

http://projectmaterialng.blogspot.com.ng/

http://projectmaterialng.blogspot.com.ng/

http://projectdevelopersng.blogspot.com.ng/

http://myprojectsng.blogspot.com.ng/

http://projetsoft.blogspot.com.ng/

http://googleprojectsng.blogspot.com.ng/

http://projectdeveloperng.blogspot.com.ng/

http://tetproj.blogspot.com.ng/

http://projectfaculty.blogspot.com.ng/

http://femsproject.blogspot.com.ng/

http://egoboosterbook.blogspot.com.ng/

http://projecttopicz.blogspot.com.ng/

http://goodprojecttopic.blogspot.com.ng/

http://worldofnolimit.blogspot.com.ng/

http://worldofnolimits.blogspot.com.ng/

http://careerstool.blogspot.com.ng/

http://afrilibs.blogspot.com.ng/

http://ngwriterz.blogspot.com.ng/

http://ngwriter.blogspot.com.ng/

http://projectmaterialz.blogspot.com.ng/

http://articlezng.blogspot.com.ng/

http://laittosprojectsolution.blogspot.com.ng/

http://blastyourprojectreloaded.blogspot.com.ng/

http://projectaider.blogspot.com.ng/

http://africle.blogspot.com.ng/

http://projectstocs.blogspot.com.ng/

http://ngprojectz.blogspot.com.ng/

http://projectscrew.blogspot.com.ng/

http://laittosprojects.blogspot.com.ng/

http://15projectz.blogspot.com.ng/

iproject01.blogspot.com

projectsaider.blogspot.com

projecttopicshq.blogspot.com

questias.blogspot.com

4myresearch.blogspot.com

hiwriterz.blogspot.com

jamtechprojectz.blogspot.com

projectzmaterial.blogspot.com

grossarchives.blogspot.com

classicprojectz.blogspot.com

allprojecttopic.blogspot.com

careerslite.blogspot.com

careerslit.blogspot.com

afribarys.blogspot.com

afrilibz.blogspot.com

360research.blogspot.com

www.easymaterial.net

www.easyresearches.net

www.easymaterial.com.ng

www.easymaterials.com.ng

www.easyprojectmaterial.net

www.easyprojectmaterials.net

www.easyprojectsmaterials.net

www.easyprojectsmaterial.net

www.faculty.com.ng

www.department.com.ng

www.topics.com.ng

www.topic.com.ng

www.researches.com.ng

www.nairatopic.com

www.nairatopics.com

www.nairatopic.net

www.nairatopics.net

www.nairamaterial.com

www.nairamaterials.com

www.nairamaterial.net

www.nairamaterials.net

www.nairaresearch.com

www.nairaresearch.net

www.collegework.com.ng

www.collegeworks.com.ng

www.collegework.net

easyprojectmaterial.net

easyprojectsmaterial.net

easyprojectsmaterials.net

easyprojectmaterial.net.ng

easyprojectmaterials.net.ng

easyprojectsmaterials.net.ng

easyprojectsmaterial.net.ng

 

 

 

 

 

Tags:

7 years ago 0 Comments Short URL

MECHANICAL ENGINEERING PROJECT MATERIALS

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE:

WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953,08168759420

WE WILL THEN SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE

 

NOTE ALSO:

IF YOU ALREADY HAVE AN APPROVED PROJECT TOPIC THAT IS NOT ON OUR WEBSITE,WE CAN ALSO DEVELOP IT FOR YOU.WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE WITHIN 48 HOURS

JUST SEND YOUR EMAIL ADDRESS AND THE APPROVED TOPIC TO 08068231953, 08168759420

 

MECHANICAL ENGINEERING PROJECT  MATERIALS

 

1. AN ELECTRIC POP-CORN MACHINE

 


2. AUTOMOBILE MOTOR VEHICLE CONSTRUCTION

 


3. BENCH SHAPING MACHINE

 


4. CONSTRUCTION OF A MOBILE REFRIGERATOR

 


5. CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE

 


6. CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG DANZA BUS

 


7. CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR

 


8. CONSTRUCTION OF A STANDARD BAKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)

 


9. CONSTRUCTION OF A VERTICAL FIRE TUBE BOILER

 


10. CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

 

 


11. CONSTRUCTION OF CELLOPHANE SEALING AND CUTTING MACHINE

 


12. CONSTRUCTION OF GRAIN GRINDING MACHINE

 


13. CONSTRUCTION OF TWO FACE GAS BURNER

 


14. DESIGN A ND FABRICATION OF A CONCRETE FLOOR TILES MOULDING MACHINE

 


15. DESIGN A ND FABRICATION OF A DUST EXTRACTOR

 


16. DESIGN AND CONSTRUCTION OF A 505 PEUGOT PISTON MOULD

 


17. DESIGN AND CONSTRUCTION OF A CREEP TESTING EQUIPMENT FOR LOW TEMPERATURE MELTING MATERIAL (PLASTICS)

 


18. DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE

 


19. DESIGN AND CONSTRUCTION OF A SPIN DRYER

 


20. DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE

 


21. DESIGN AND CONSTRUCTION OF BAKING OVEN

 


22. DESIGN AND CONSTRUCTION OF METALLIC BOOKSHELF

 


23. DESIGN AND CONSTRUCTION OF PUNCH AND DIE FOR PRODUCTION OF CUPS

 


24. DESIGN AND FABRICATION OF 80CM X 70CM X 50CM MOBILE DEEP FREEZER

 


25. DESIGN AND FABRICATION OF A 12M3 MOBILE DEEP FREEZER

 


26. DESIGN AND FABRICATION OF A CREEP TESTING EQUIPMEMT

 


27. DESIGN AND FABRICATION OF A MECHANICAL LAWN MOWER

 


28. DESIGN AND FABRICATION OF A METAL BOOKSHELF

 


29. DESIGN AND FABRICATION OF A MOBILE DEEP FREEZER

 


30. DESIGN AND FABRICATION OF A MOBILE REFRIGERATOR.

 


31. DESIGN AND FABRICATION OF A PALM FRUIT DIGESTER

 


32. DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)

 


33. DESIGN AND FABRICATION OF A PRINTING I BLOCK MACHINE

 


34. DESIGN AND FABRICATION OF AN ELECTRIC STOVE/OVEN

 


35. DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE

 


36. DESIGN AND FABRICATION OF CHILDREN SWING

 


37. DESIGN AND FABRICATION OF CORN SHELLING MACHINE

 


38. DESIGN AND FABRICATION OF CREEP MATERIAL TESTING EQUIPMENT

 


39. DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.

 


40. DESIGN AND FABRICATION OF WOOD LATHE MACHINE

 


41. FABRICATION OF A FOLDABLE CAMP BED

 


42. FABRICATION OF A METALLIC BOOKSHELF

 

 

43. FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE

 


44. FABRICATION OF A STANDARD WHEELBARROW

 


45. FABRICATION OF BENCH SHEARING MACHINE

 


46. FABRICATION OF METAL SHELF

 


47. FABRICATION OF REFRIGERATOR (DEEPFREEZE)

 


48. NYLON CUTTING AND SEALING MACHINE

 


49. RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.

 


50. REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO

 


51. REHABILITATION OF INSTITUTE’S GROUP BUS.

 


52. REPAIR AND FABRICATION OF A REFRIGERATOR SYSTEM

 


53. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING

 


54. REPAIR AND REHABILITATION OF A FACULTY AIR-CONDITIONER IN ENGR. OMEJE’S OFFICE IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (IMT), ENUGU.

 


55. REPAIR AND REHABILITATION OF A FACULTY REFRIGERATOR

 


56. REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER

 


57. REPAIR AND REHABILITATION OF A FAULTY AIR- CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE AT INSTITUTE OF MANAGEMENT AND TECHNOLOGY (IMT) ENUGU
58. REPAIR AND REHABILITATION OF A FAULTY AIR-CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T.) ENUGU
59. REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER
60. REPAIR AND REHABILITATION OF A ROOM AIR-CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT.
61. REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
62. REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE
63. REPAIR OF A DAMAGED REFRIGERATOR
64. REPAIR OF A FAULTY REFRIGERATOR IN THE MECHANICAL ENGINEERING DEPARTMENT OF THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU
65. REPAIR OF AN AIR CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT
66. REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
67. THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER.
68. THE CONSTRUCTION AND FABRICATION OF A METAL BOOKSHEET
69. THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
70. THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE
71. THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE

72. THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE
73. THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
74. THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
75. THE FABRICATION OF A PRESSURIZED KEROSENE OVEN
76. THE FABRICATION OF A SINGLE FACE PRESSURIZED KEROSENE COOKER.
77 FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
78 FABRICATION OF METAL SHELF
79 RURAL MANAGEMENT AS A STRATEGY FOR REDUCING RURAL – URBAN MIGRATION IN NIGERIA (A CASE STUDY OF ISHIELY LOCAL GOVERNMENT AREA OF EBONYI STATE)
80 CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
91 DESIGN A ND FABRICATION OF A DUST EXTRACTOR
92 CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
93 DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
94 DESIGN AND CONSTRUCTION OF A SPIN DRYER
95 CONSTRUCTION OF A WOODEN BOOK SHELF
96 DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE
97 REPAIR OF A DAMAGED REFRIGERATOR
98 CONSTRUCTOIN OF AN OPEN STEAM DISTILLATOIN COLUMN
99 THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
100 DESIGN AND CONSTRUCTION OF BAKING OVEN
101 REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
102 REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE
103 CONSTRUCTION OF PROPELLER AGITATOR
104 CONSTRUCTION OF TWO FACE GAS BURNER
105 REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
106 AN EVALUATION OF PROPERTY RATING PRACTICE IN NIGERIA
(A CASE STUDY OF ENUGU NORTH LOCAL GOVERNMENT AREA)
107 MANAGEMENT OF COMMERCIAL PROPERTIES IN NIGERIA (A CASE STUDY AT AWKA METROPOLIS)
108 FABRICATION OF A FOLDABLE CAMP BED
109 THE PROBLEM OF SOLID WASTE MANAGEMENT IN ENUGU METROPOLIS
A CASE STUDY IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) CAMPUS III ENUGU
110 REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER
111 REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO
112 DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.
113 DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
114 THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
115 THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
116 A COMPARATIVE ANALYSIS OF RENTAL VARIATION IN RESIDENTIAL AND COMMERCIAL PROPERTIES IN NIGERIA (A CASE STUDY OF OGUI NEW LAYOUT ENUGU)
117 DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER
118 PRODUCTION AND ACCEPTABILITY STUDIES OF MALTED SORGHUM (SORGHUM BICOLOR) BISCUIT
119 CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)
120 RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.
121 DESIGN AND FABRICATION OF WOOD LATHE MACHINE
122 POLLUTANTS IN ENUGU URBAN AN EMISSION INVENTORY OF POLLUTANTS IN ENUGU URBAN
123. THE RATE OF BLEACHING OF PALM OIL WHITE COAL.
124 PRODUCTION OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.
125 CHARACTERIZATION OF SOME BRANDED MOTOR OIL
126 DEVELOPING THE PROCESS OF PLASTIC INDUSTRY IN NIGERIA
127 PRODUCTION OF HIGH QUALITY BODY PERFUME
128 PROCESS DEVELOPMENT IN THE PRODUCTION OF VEGETABLE OIL FROM LOCAL RAW MATERIAL
129 COMPARISM RESEARCH ON SOAP AND DETERGENT POWDER
130 PRODUCTION OF VEGETABLE OIL USING ENUGU COAL
131 NEW FORMULAE FOR ESTIMATING FIXED INVESTMENT CAPITAL COSTS
132 PRODUCTION OF HOUSE HOLD INSECT- KILLER
133 RESEARCH PROJECT ON BLEACHING OF PALM OIL WITH NIGERIA CLAY
134 MODIFICATION OF MODEL SEDIMENTATION TANK
135 CONSTRUCTION OF METAL MOULD FOR SOAP PRODUCTION
136 CONSTRUCTION OF A SIMPLE METALLIC MOULD

 

 

 

 

 

AFFILIATE LINKS:

 

www.easyprojectmaterials.com

www.easyprojectsolutions.com

www.worldofnolimit.com

www.nairaproject.com.ng

www.nairaprojects.com.ng

www.nairaproject.net

www.nairaprojects.net

www.uniproject.com.ng
www.uniprojects.com.ng
www.uniprojectz.net
uni-project.net
hiwriters.com.ng
hiwriter.com.ng
hiwriters.net
hiwriter.net
jamtechproject.com.ng
jamtechprojects.com.ng
jamtechproject.net
jamtechprojects.net
www.easyprojectmaterials.com
www.easyprojectsolutions.com
www.worldofnolimit.com
www.easyprojectmaterials.com.ng
www.easyprojectsmaterials.com.ng
www.easyprojectsmaterials.com
www.easyprojectsmaterial.com
www.easyprojectsmaterial.com.ng
www.easyprojectmaterial.com.ng
www.projectmaterial.com.ng
www.projectmaterials.com.ng
www.projectmaterials.com
www.myprojectmaterial.com.ng
www.myprojectmaterials.com
www.researchprojectmaterial.com
www.researchprojectmaterials.com

http://projstuf.blogspot.com.ng/

http://highwriter.blogspot.com.ng/

http://nairaprojects.blogspot.com.ng/

http://jamtechprojects.blogspot.com.ng/

http://preshstore.blogspot.com.ng/

http://laitosproject.blogspot.com.ng/

http://educprojects.blogspot.com.ng/

http://projectsalesng.blogspot.com.ng/

http://projstoc.blogspot.com.ng/

http://projectstreetng.blogspot.com.ng/

http://eazyprojectsmaterial.blogspot.com.ng/

http://eazyprojectsmaterials.blogspot.com.ng/

http://easeprojectsmaterials.blogspot.com.ng/

http://easeprojectmaterial.blogspot.com.ng/

http://easyprojectsmaterials.blogspot.com.ng/

http://mastersprojectmaterials.blogspot.com.ng/

http://easyprojectsmaterial.blogspot.com.ng/

http://projectchaptersng.blogspot.com.ng/

http://easeprojectmaterials.blogspot.com.ng/

http://easeprojectsmaterial.blogspot.com.ng/

http://easzprojectmaterial.blogspot.com.ng/

http://easzprojectmaterial.blogspot.com.ng/

http://projectchapters.blogspot.com.ng/

http://academicprojectworld.blogspot.com.ng/

http://projectsng.blogspot.com.ng/

http://projectfilesng.blogspot.com.ng/

http://projectmaterialng.blogspot.com.ng/

http://projectmaterialng.blogspot.com.ng/

http://projectdevelopersng.blogspot.com.ng/

http://myprojectsng.blogspot.com.ng/

http://projetsoft.blogspot.com.ng/

http://googleprojectsng.blogspot.com.ng/

http://projectdeveloperng.blogspot.com.ng/

http://tetproj.blogspot.com.ng/

http://projectfaculty.blogspot.com.ng/

http://femsproject.blogspot.com.ng/

http://egoboosterbook.blogspot.com.ng/

http://projecttopicz.blogspot.com.ng/

http://goodprojecttopic.blogspot.com.ng/

http://worldofnolimit.blogspot.com.ng/

http://worldofnolimits.blogspot.com.ng/

http://careerstool.blogspot.com.ng/

http://afrilibs.blogspot.com.ng/

http://ngwriterz.blogspot.com.ng/

http://ngwriter.blogspot.com.ng/

http://projectmaterialz.blogspot.com.ng/

http://articlezng.blogspot.com.ng/

http://laittosprojectsolution.blogspot.com.ng/

http://blastyourprojectreloaded.blogspot.com.ng/

http://projectaider.blogspot.com.ng/

http://africle.blogspot.com.ng/

http://projectstocs.blogspot.com.ng/

http://ngprojectz.blogspot.com.ng/

http://projectscrew.blogspot.com.ng/

http://laittosprojects.blogspot.com.ng/

http://15projectz.blogspot.com.ng/

iproject01.blogspot.com

projectsaider.blogspot.com

projecttopicshq.blogspot.com

questias.blogspot.com

4myresearch.blogspot.com

hiwriterz.blogspot.com

jamtechprojectz.blogspot.com

projectzmaterial.blogspot.com

grossarchives.blogspot.com

classicprojectz.blogspot.com

allprojecttopic.blogspot.com

careerslite.blogspot.com

careerslit.blogspot.com

afribarys.blogspot.com

afrilibz.blogspot.com

360research.blogspot.com

www.easymaterial.net

www.easyresearches.net

www.easymaterial.com.ng

www.easymaterials.com.ng

www.easyprojectmaterial.net

www.easyprojectmaterials.net

www.easyprojectsmaterials.net

www.easyprojectsmaterial.net

www.faculty.com.ng

www.department.com.ng

www.topics.com.ng

www.topic.com.ng

www.researches.com.ng

www.nairatopic.com

www.nairatopics.com

www.nairatopic.net

www.nairatopics.net

www.nairamaterial.com

www.nairamaterials.com

www.nairamaterial.net

www.nairamaterials.net

www.nairaresearch.com

www.nairaresearch.net

www.collegework.com.ng

www.collegeworks.com.ng

www.collegework.net

 

 

 

Tags:

7 years ago 0 Comments Short URL

MECHANICAL ENGINEERING PROJECT TOPICS AND MATERIALS

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

 

NOTE:

WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953,08168759420

WE WILL THEN SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE

 

NOTE ALSO:

IF YOU ALREADY HAVE AN APPROVED PROJECT TOPIC THAT IS NOT ON OUR WEBSITE,WE CAN ALSO DEVELOP IT FOR YOU.WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE WITHIN 48 HOURS

JUST SEND YOUR EMAIL ADDRESS AND THE APPROVED TOPIC TO 08068231953, 08168759420

 

MECHANICAL ENGINEERING PROJECT TOPICS AND MATERIALS

 

1. AN ELECTRIC POP-CORN MACHINE

 


2. AUTOMOBILE MOTOR VEHICLE CONSTRUCTION

 


3. BENCH SHAPING MACHINE

 


4. CONSTRUCTION OF A MOBILE REFRIGERATOR

 


5. CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE

 


6. CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG DANZA BUS

 


7. CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR

 


8. CONSTRUCTION OF A STANDARD BAKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)

 


9. CONSTRUCTION OF A VERTICAL FIRE TUBE BOILER

 


10. CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

 

 


11. CONSTRUCTION OF CELLOPHANE SEALING AND CUTTING MACHINE

 


12. CONSTRUCTION OF GRAIN GRINDING MACHINE

 


13. CONSTRUCTION OF TWO FACE GAS BURNER

 


14. DESIGN A ND FABRICATION OF A CONCRETE FLOOR TILES MOULDING MACHINE

 


15. DESIGN A ND FABRICATION OF A DUST EXTRACTOR

 


16. DESIGN AND CONSTRUCTION OF A 505 PEUGOT PISTON MOULD

 


17. DESIGN AND CONSTRUCTION OF A CREEP TESTING EQUIPMENT FOR LOW TEMPERATURE MELTING MATERIAL (PLASTICS)

 


18. DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE

 


19. DESIGN AND CONSTRUCTION OF A SPIN DRYER

 


20. DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE

 


21. DESIGN AND CONSTRUCTION OF BAKING OVEN

 


22. DESIGN AND CONSTRUCTION OF METALLIC BOOKSHELF

 


23. DESIGN AND CONSTRUCTION OF PUNCH AND DIE FOR PRODUCTION OF CUPS

 


24. DESIGN AND FABRICATION OF 80CM X 70CM X 50CM MOBILE DEEP FREEZER

 


25. DESIGN AND FABRICATION OF A 12M3 MOBILE DEEP FREEZER

 


26. DESIGN AND FABRICATION OF A CREEP TESTING EQUIPMEMT

 


27. DESIGN AND FABRICATION OF A MECHANICAL LAWN MOWER

 


28. DESIGN AND FABRICATION OF A METAL BOOKSHELF

 


29. DESIGN AND FABRICATION OF A MOBILE DEEP FREEZER

 


30. DESIGN AND FABRICATION OF A MOBILE REFRIGERATOR.

 


31. DESIGN AND FABRICATION OF A PALM FRUIT DIGESTER

 


32. DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)

 


33. DESIGN AND FABRICATION OF A PRINTING I BLOCK MACHINE

 


34. DESIGN AND FABRICATION OF AN ELECTRIC STOVE/OVEN

 


35. DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE

 


36. DESIGN AND FABRICATION OF CHILDREN SWING

 


37. DESIGN AND FABRICATION OF CORN SHELLING MACHINE

 


38. DESIGN AND FABRICATION OF CREEP MATERIAL TESTING EQUIPMENT

 


39. DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.

 


40. DESIGN AND FABRICATION OF WOOD LATHE MACHINE

 


41. FABRICATION OF A FOLDABLE CAMP BED

 


42. FABRICATION OF A METALLIC BOOKSHELF

 

 

43. FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE

 


44. FABRICATION OF A STANDARD WHEELBARROW

 


45. FABRICATION OF BENCH SHEARING MACHINE

 


46. FABRICATION OF METAL SHELF

 


47. FABRICATION OF REFRIGERATOR (DEEPFREEZE)

 


48. NYLON CUTTING AND SEALING MACHINE

 


49. RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.

 


50. REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO

 


51. REHABILITATION OF INSTITUTE’S GROUP BUS.

 


52. REPAIR AND FABRICATION OF A REFRIGERATOR SYSTEM

 


53. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING

 


54. REPAIR AND REHABILITATION OF A FACULTY AIR-CONDITIONER IN ENGR. OMEJE’S OFFICE IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (IMT), ENUGU.

 


55. REPAIR AND REHABILITATION OF A FACULTY REFRIGERATOR

 


56. REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER

 


57. REPAIR AND REHABILITATION OF A FAULTY AIR- CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE AT INSTITUTE OF MANAGEMENT AND TECHNOLOGY (IMT) ENUGU
58. REPAIR AND REHABILITATION OF A FAULTY AIR-CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T.) ENUGU
59. REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER
60. REPAIR AND REHABILITATION OF A ROOM AIR-CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT.
61. REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
62. REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE
63. REPAIR OF A DAMAGED REFRIGERATOR
64. REPAIR OF A FAULTY REFRIGERATOR IN THE MECHANICAL ENGINEERING DEPARTMENT OF THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU
65. REPAIR OF AN AIR CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT
66. REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
67. THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER.
68. THE CONSTRUCTION AND FABRICATION OF A METAL BOOKSHEET
69. THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
70. THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE
71. THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE

72. THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE
73. THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
74. THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
75. THE FABRICATION OF A PRESSURIZED KEROSENE OVEN
76. THE FABRICATION OF A SINGLE FACE PRESSURIZED KEROSENE COOKER.
77 FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
78 FABRICATION OF METAL SHELF
79 RURAL MANAGEMENT AS A STRATEGY FOR REDUCING RURAL – URBAN MIGRATION IN NIGERIA (A CASE STUDY OF ISHIELY LOCAL GOVERNMENT AREA OF EBONYI STATE)
80 CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
91 DESIGN A ND FABRICATION OF A DUST EXTRACTOR
92 CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
93 DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
94 DESIGN AND CONSTRUCTION OF A SPIN DRYER
95 CONSTRUCTION OF A WOODEN BOOK SHELF
96 DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE
97 REPAIR OF A DAMAGED REFRIGERATOR
98 CONSTRUCTOIN OF AN OPEN STEAM DISTILLATOIN COLUMN
99 THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
100 DESIGN AND CONSTRUCTION OF BAKING OVEN
101 REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
102 REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE
103 CONSTRUCTION OF PROPELLER AGITATOR
104 CONSTRUCTION OF TWO FACE GAS BURNER
105 REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
106 AN EVALUATION OF PROPERTY RATING PRACTICE IN NIGERIA
(A CASE STUDY OF ENUGU NORTH LOCAL GOVERNMENT AREA)
107 MANAGEMENT OF COMMERCIAL PROPERTIES IN NIGERIA (A CASE STUDY AT AWKA METROPOLIS)
108 FABRICATION OF A FOLDABLE CAMP BED
109 THE PROBLEM OF SOLID WASTE MANAGEMENT IN ENUGU METROPOLIS
A CASE STUDY IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) CAMPUS III ENUGU
110 REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER
111 REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO
112 DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.
113 DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
114 THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
115 THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
116 A COMPARATIVE ANALYSIS OF RENTAL VARIATION IN RESIDENTIAL AND COMMERCIAL PROPERTIES IN NIGERIA (A CASE STUDY OF OGUI NEW LAYOUT ENUGU)
117 DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER
118 PRODUCTION AND ACCEPTABILITY STUDIES OF MALTED SORGHUM (SORGHUM BICOLOR) BISCUIT
119 CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)
120 RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.
121 DESIGN AND FABRICATION OF WOOD LATHE MACHINE
122 POLLUTANTS IN ENUGU URBAN AN EMISSION INVENTORY OF POLLUTANTS IN ENUGU URBAN
123. THE RATE OF BLEACHING OF PALM OIL WHITE COAL.
124 PRODUCTION OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.
125 CHARACTERIZATION OF SOME BRANDED MOTOR OIL
126 DEVELOPING THE PROCESS OF PLASTIC INDUSTRY IN NIGERIA
127 PRODUCTION OF HIGH QUALITY BODY PERFUME
128 PROCESS DEVELOPMENT IN THE PRODUCTION OF VEGETABLE OIL FROM LOCAL RAW MATERIAL
129 COMPARISM RESEARCH ON SOAP AND DETERGENT POWDER
130 PRODUCTION OF VEGETABLE OIL USING ENUGU COAL
131 NEW FORMULAE FOR ESTIMATING FIXED INVESTMENT CAPITAL COSTS
132 PRODUCTION OF HOUSE HOLD INSECT- KILLER
133 RESEARCH PROJECT ON BLEACHING OF PALM OIL WITH NIGERIA CLAY
134 MODIFICATION OF MODEL SEDIMENTATION TANK
135 CONSTRUCTION OF METAL MOULD FOR SOAP PRODUCTION
136 CONSTRUCTION OF A SIMPLE METALLIC MOULD

 

 

 

 

 

AFFILIATE LINKS:

 

www.easyprojectmaterials.com

www.easyprojectsolutions.com

www.worldofnolimit.com

www.nairaproject.com.ng

www.nairaprojects.com.ng

www.nairaproject.net

www.nairaprojects.net

www.uniproject.com.ng
www.uniprojects.com.ng
www.uniprojectz.net
uni-project.net
hiwriters.com.ng
hiwriter.com.ng
hiwriters.net
hiwriter.net
jamtechproject.com.ng
jamtechprojects.com.ng
jamtechproject.net
jamtechprojects.net
www.easyprojectmaterials.com
www.easyprojectsolutions.com
www.worldofnolimit.com
www.easyprojectmaterials.com.ng
www.easyprojectsmaterials.com.ng
www.easyprojectsmaterials.com
www.easyprojectsmaterial.com
www.easyprojectsmaterial.com.ng
www.easyprojectmaterial.com.ng
www.projectmaterial.com.ng
www.projectmaterials.com.ng
www.projectmaterials.com
www.myprojectmaterial.com.ng
www.myprojectmaterials.com
www.researchprojectmaterial.com
www.researchprojectmaterials.com

http://projstuf.blogspot.com.ng/

http://highwriter.blogspot.com.ng/

http://nairaprojects.blogspot.com.ng/

http://jamtechprojects.blogspot.com.ng/

http://preshstore.blogspot.com.ng/

http://laitosproject.blogspot.com.ng/

http://educprojects.blogspot.com.ng/

http://projectsalesng.blogspot.com.ng/

http://projstoc.blogspot.com.ng/

http://projectstreetng.blogspot.com.ng/

http://eazyprojectsmaterial.blogspot.com.ng/

http://eazyprojectsmaterials.blogspot.com.ng/

http://easeprojectsmaterials.blogspot.com.ng/

http://easeprojectmaterial.blogspot.com.ng/

http://easyprojectsmaterials.blogspot.com.ng/

http://mastersprojectmaterials.blogspot.com.ng/

http://easyprojectsmaterial.blogspot.com.ng/

http://projectchaptersng.blogspot.com.ng/

http://easeprojectmaterials.blogspot.com.ng/

http://easeprojectsmaterial.blogspot.com.ng/

http://easzprojectmaterial.blogspot.com.ng/

http://easzprojectmaterial.blogspot.com.ng/

http://projectchapters.blogspot.com.ng/

http://academicprojectworld.blogspot.com.ng/

http://projectsng.blogspot.com.ng/

http://projectfilesng.blogspot.com.ng/

http://projectmaterialng.blogspot.com.ng/

http://projectmaterialng.blogspot.com.ng/

http://projectdevelopersng.blogspot.com.ng/

http://myprojectsng.blogspot.com.ng/

http://projetsoft.blogspot.com.ng/

http://googleprojectsng.blogspot.com.ng/

http://projectdeveloperng.blogspot.com.ng/

http://tetproj.blogspot.com.ng/

http://projectfaculty.blogspot.com.ng/

http://femsproject.blogspot.com.ng/

http://egoboosterbook.blogspot.com.ng/

http://projecttopicz.blogspot.com.ng/

http://goodprojecttopic.blogspot.com.ng/

http://worldofnolimit.blogspot.com.ng/

http://worldofnolimits.blogspot.com.ng/

http://careerstool.blogspot.com.ng/

http://afrilibs.blogspot.com.ng/

http://ngwriterz.blogspot.com.ng/

http://ngwriter.blogspot.com.ng/

http://projectmaterialz.blogspot.com.ng/

http://articlezng.blogspot.com.ng/

http://laittosprojectsolution.blogspot.com.ng/

http://blastyourprojectreloaded.blogspot.com.ng/

http://projectaider.blogspot.com.ng/

http://africle.blogspot.com.ng/

http://projectstocs.blogspot.com.ng/

http://ngprojectz.blogspot.com.ng/

http://projectscrew.blogspot.com.ng/

http://laittosprojects.blogspot.com.ng/

http://15projectz.blogspot.com.ng/

iproject01.blogspot.com

projectsaider.blogspot.com

projecttopicshq.blogspot.com

questias.blogspot.com

4myresearch.blogspot.com

hiwriterz.blogspot.com

jamtechprojectz.blogspot.com

projectzmaterial.blogspot.com

grossarchives.blogspot.com

classicprojectz.blogspot.com

allprojecttopic.blogspot.com

careerslite.blogspot.com

careerslit.blogspot.com

afribarys.blogspot.com

afrilibz.blogspot.com

360research.blogspot.com

www.easymaterial.net

www.easyresearches.net

www.easymaterial.com.ng

www.easymaterials.com.ng

www.easyprojectmaterial.net

www.easyprojectmaterials.net

www.easyprojectsmaterials.net

www.easyprojectsmaterial.net

www.faculty.com.ng

www.department.com.ng

www.topics.com.ng

www.topic.com.ng

www.researches.com.ng

www.nairatopic.com

www.nairatopics.com

www.nairatopic.net

www.nairatopics.net

www.nairamaterial.com

www.nairamaterials.com

www.nairamaterial.net

www.nairamaterials.net

www.nairaresearch.com

www.nairaresearch.net

www.collegework.com.ng

www.collegeworks.com.ng

www.collegework.net

 

 

 

 

 

 

 

Tags: , ,

8 years ago 0 Comments Short URL

PROJECT TOPICS AND MATERIALS IN MECHANICAL ENGINEERING

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE: WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953,08168759420

WE WILL THEN SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE

NOTE ALSO:

IF YOU ALREADY HAVE AN APPROVED PROJECT TOPIC THAT IS NOT ON OUR WEBSITE,WE CAN ALSO DEVELOP IT FOR YOU.WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE WITHIN 48 HOURS

JUST SEND YOUR EMAIL ADDRESS AND THE APPROVED TOPIC TO 08068231953,08168759420

 

PROJECT TOPICS AND MATERIALS IN MECHANICAL ENGINEERING

 

1 FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
2 FABRICATION OF METAL SHELF
3 RURAL MANAGEMENT AS A STRATEGY FOR REDUCING RURAL – URBAN MIGRATION IN NIGERIA
(A CASE STUDY OF ISHIELY LOCAL GOVERNMENT AREA OF EBONYI STATE)
4 CONSTRUCTION OF A MOBILE REFRIGERATOR
FRIDGE
5 DESIGN A ND FABRICATION OF A DUST EXTRACTOR
6 CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
7 DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
8 DESIGN AND CONSTRUCTION OF A SPIN DRYER
9 CONSTRUCTION OF A WOODEN BOOK SHELF
10 DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE
11 REPAIR OF A DAMAGED REFRIGERATOR
12 CONSTRUCTOIN OF AN OPEN STEAM DISTILLATOIN COLUMN
13 THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
14 DESIGN AND CONSTRUCTION OF BAKING OVEN
15 REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
16 REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE’S OFFICE
17 CONSTRUCTION OF PROPELLER AGITATOR
18 CONSTRUCTION OF TWO FACE GAS BURNER
19 REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
20 AN EVALUATION OF PROPERTY RATING PRACTICE IN NIGERIA
(A CASE STUDY OF ENUGU NORTH LOCAL GOVERNMENT AREA)
21 MANAGEMENT OF COMMERCIAL PROPERTIES IN NIGERIA
(A CASE STUDY AT AWKA METROPOLIS)
22 FABRICATION OF A FOLDABLE CAMP BED
23 THE PROBLEM OF SOLID WASTE
MANAGEMENT IN ENUGU METROPOLIS
A CASE STUDY IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) CAMPUS III ENUGU
24 REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER
25 REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO
26 DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.
27 DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
28 THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
29 THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
30 A COMPARATIVE ANALYSIS OF RENTAL VARIATION IN RESIDENTIAL AND COMMERCIAL PROPERTIES IN NIGERIA
(A CASE STUDY OF OGUI NEW LAYOUT ENUGU)
31 DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER
32 PRODUCTION AND ACCEPTABILITY STUDIES OF MALTED SORGHUM (SORGHUM BICOLOR) BISCUIT
33 CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN)
WITH DUAL POWER SOURCE (ELECTRIC/GAS)
34 RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.

39 DESIGN AND FABRICATION OF WOOD LATHE MACHINE
40POLLUTANTS IN ENUGU URBAN,AN EMISSION INVENTORY
OF POLLUTANTS IN ENUGU URBAN
41. THE RATE OF BLEACHING OF PALM OIL WHITE COAL.

 

 

42PRODUCTION OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD.
43.CHARACTERIZATION OF SOME BRANDED MOTOR Oil
44.DEVELOPING THE PROCESS OF PLASTIC INDUSTRY IN NIGERIA
45 PRODUCTION OF HIGH QUALITY BODY PERFUME
46 PROCESS DEVELOPMENT IN THE PRODUCTION OF VEGETABLE OIL FROM LOCAL RAW MATERIAL
47 COMPARISM RESEARCH ON SOAP AND DETERGENT POWDER
48 PRODUCTION OF VEGETABLE OIL USING
ENUGU COAL
49NEW FORMULAE FOR ESTIMATING FIXED INVESTMENT CAPITAL COSTS
50PRODUCTION OF HOUSE HOLD INSECT- KILLER
51 RESEARCH PROJECT ON BLEACHING OF PALM OIL WITH NIGERIA CLAY
52.MODIFICATION OF MODEL SEDIMENTATION TANK
53.CONSTRUCTION OF METAL MOULD FOR SOAP PRODUCTION
54.CONSTRUCTION OF A SIMPLE METALLIC MOULD

 

 

 

 

 

 

 

 

 

AFFILIATE LINKS:

 

www.projectanswerng.com   www.projectanswersng.com   www.projectstockng.com

www.projectstocksng.com      www.projectstoreng.com         www.projectstoresng.com

www.projectarchiveng.com     www.projectarchivesng.com    www.projectdocng.com

www.projectdocsng.com         www.projectfileng.com              www.projectfilesng.com

www.myprojectng.com            www.myprojectsng.com            www.mymaterialng.com

www.mymaterialsng.com         www.projectsolutionng.com      www.projectsolutionsng.com

www.projectdeveloperng.com   www.projectdevelopersng.com   www.projectworkng.com

www.projectworksng.com         www.easyprojectmaterials.com      www.worldofnolimit.com

www.easyprojectsolutions.com   www.fastprojectmaterials.com     www.currentprojectmaterials.com

www.sweetprojectmaterials.com   www.softprojectmaterials.com  www.easyprojectstock.com

www.easyprojectmaterials.com.ng    www.easyprojectsmaterial.com

www.easyprojectsmaterials.com       www.easyprojectsmaterial.com.ng

www.easyprojectsmaterials.com.ng    http://projectdevelopersng.blogspot.com

http://myprojectsng.blogspot.com                         http://projectdeveloperng.blogspot.com

http://projetsoft.blogspot.com                                http://googleprojectsng.blogspot.com

http://ngtopicstop.blogspot.com                             http://googletopicsng.blogspot.com

http://myprojectng.blogspot.com                            http://ngtopics.blogspot.com

www.projectfilesng.blogspot.com                            www.projectfileng.blogspot.com

www.projectmaterials.blogspot.com                       www.projectmaterialsng.blogspot.com

www.projectmaterialng.blogspot.com                    www.projectstoreng.blogspot.com

www.projectstoresng.blogspot.com                         www.projectsstoresng.blogspot.com

www.projectworksng.blogspot.com                          www.projectsworksng.blogspot.com

www.projectbaseng.blogspot.com                             www.projectbasesng.blogspot.com

www.projectshareng.blogspot.com                           www.projectsharesng.blogspot.com

www.projectwriteupng.blogspot.com                       www.projectwriteupsng.blogspot.com

www.projectdocng.blogspot.com                               www.projectdocsng.blogspot.com

www.projecttextng.blogspot.com                               www.projecttextsng.blogspot.com

www.projecttestng.blogspot.com                               www.projecttestsng.blogspot.com

www.projectanswerng.blogspot.com                         www.projectanswersng.blogspot.com

www.projectsolutionsng.blogspot.com                     www.projectsolutionng.blogspot.com

www.projectengineng.blogspot.com                          www.projectenginesng.blogspot.com

www.projectcreationng.blogspot.com                        www.projectcreationsng.blogspot.com

www.projectlandng.blogspot.com                               www.projectlandsng.blogspot.com

www.projectworldng.blogspot.com                             www.projectworldsng.blogspot.com

www.projectglobeng.blogspot.com                              www.projectglobesng.blogspot.com

www.projectuniverseng.blogspot.com                         www.projectuniversalng.blogspot.com

www.projectideang.blogspot.com                                www.projectideasng.blogspot.com

www.projectbestng.blogspot.com                                www.projectbestsng.blogspot.com

www.projectbirthng.blogspot.com                                www.projectbirthsng.blogspot.com

www.projectcaseng.blogspot.com                                 www.projectcasesng.blogspot.com

www.projectmineng.blogspot.com                                 www.projectminesng.blogspot.com

www.projecttimeng.blogspot.com                                  www.projecttimesng.blogspot.com

www.projectwebng.blogspot.com                                    www.projectwebsng.blogspot.com

www.projectlinksng.blogspot.com                                 www.projectlinkng.blogspot.com

www.projectdigitalng.blogspot.com                               www.projectdigitalsng.blogspot.com

www.projectlanguageng.blogspot.com                          www.projectlanguagesng.blogspot.com

www.projectresultng.blogspot.com                                 www.projectresultsng.blogspot.com

www.projectadvertng.blogspot.com                                www.projectadvertsng.blogspot.com

www.projecthomeng.blogspot.com                                 www.projecthomesng.blogspot.com

www.projectproviderng.blogspot.com                            www.projectprovidersng.blogspot.com

www.projectpageng.blogspot.com                                   www.projectpagesng.blogspot.com

www.projecttoolng.blogspot.com                                     www.projecttoolsng.blogspot.com

www.projecttrendng.blogspot.com                                   www.projecttrendsng.blogspot.com

www.projectshopng.blogspot.com                                     www.projectshopsng.blogspot.com

www.projectsampleng.blogspot.com                                www.projectsamplesng.blogspot.com

www.projectclickng.blogspot.com                                     www.projectclicksng.blogspot.com

www.projectspotng.blogspot.com                                    www.projectspotsng.blogspot.com

www.projectprimeng.blogspot.com                                   www.projectprimesng.blogspot.com

www.projectvisibilityng.blogspot.com                            www.projectvisibilitysng.blogspot.com

www.projectcontentng.blogspot.com                             www.projectcontentsng.blogspot.com

www.projectdeliveredng.blogspot.com                           www.projectsdeliveredng.blogspot.com

www.projecttopng.blogspot.com                                      www.projecttopsng.blogspot.com

www.projectdownloadng.blogspot.com                           www.projectdownloadsng.blogspot.com

www.projectsystemng.blogspot.com                                www.projectsystemsng.blogspot.com

www.projectupdateng.blogspot.com                                 www.projectupdatesng.blogspot.com

www.projectstatementng.blogspot.com                            www.projectstatementsng.blogspot.com

www.projectsearchng.blogspot.com                                  www.projectsearchesng.blogspot.com

www.projectsetupngng.blogspot.com                                 www.projectsetupsng.blogspot.com

www.projectvariableng.blogspot.com                               www.projectvariablesng.blogspot.com

www.projectpaceng.blogspot.com                                      www.projectpacesng.blogspot.com

www.projectinfong.blogspot.com                                        www.projectinfosng.blogspot.com

www.projectindexng.blogspot.com                                      www.projectindexesng.blogspot.com

www.projecttrademarkng.blogspot.com                           www.projecttrademarksng.blogspot.com

www.projectauthorng.blogspot.com                                    www.projectauthorsng.blogspot.com

www.projectthingng.blogspot.com                                       www.projectthingsng.blogspot.com

www.projectageng.blogspot.com                                            www.projectagesng.blogspot.com

 

 

 

Tags: , , , ,

11 years ago 0 Comments Short URL