PROJECT MATERIALS IN CHEMICAL ENGINEERING

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE:

WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953,08168759420

WE WILL THEN SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE

NOTE ALSO:

IF YOU ALREADY HAVE AN APPROVED PROJECT TOPIC THAT IS NOT ON OUR WEBSITE,WE CAN ALSO DEVELOP IT FOR YOU.WE WILL SEND YOU THE ABSTRACT,TABLE OF CONTENT AND CHAPTER ONE FOR FREE WITHIN 48 HOURS

JUST SEND YOUR EMAIL ADDRESS AND THE APPROVED TOPIC TO 08068231953, 08168759420

PROJECT MATERIALS IN CHEMICAL ENGINEERING

1. A COMPARATIVE STUDY OF CHEMICAL AND MICROWAVE SYNTHESIZED ACTIVATED CARBORN FROM CORN COB
2. EFFECT OF PARTICLE SIZE ON OIL YIELD USING SCENT BEAN SEED (Â€˜OZAKIÂ€™).
3. HEAD LOSES IN HORIZONTAL AND VERTICAL ORIFICEMETER A COMPARATIVE EVALUATION AND ANALYSES WITH APLLICATION OF STATISTICAL METHOD OF
4. THE EFFECT OF TEMPERATURE ON HYDROLYSIS OF CELLULOSE (SAW-DUST)
5. THE PRODUCTION OF YAM FLOUR
6. ANALYSIS OF BUSH PEAR AND ITS OIL
7. ASSESSMENT OF CARBON MONOXIDE (CO) LEVEL IN ENUGU COAL CITY
8. COMPARATIVE ANALYSIS OF COAL, FUEL OIL AND NATURAL GAS FOR CEMENT PRODUCTION
9. DESIGN AND FABRICATION OF MAIZE CORN-ON-COB TRAY DRYER
10. EXTRACTION AND FORMULATION OF PERFUME FROM
11. MODIFICATION OF SURFACE, PHYSICAL AND CHEMICAL PROPERTIES OF ACTIVATED CARBONS FOR WATER PURIFICATION
12. PHYTOCHEMICAL ANALYSIS ON MORINGA OLEIFERA AND AZADRICHTA INDICA LEAVES
13. REFINING OF PALM KERNEL OIL
14. REFINING OF SOYA BEAN OIL
15. THE KINETIC STUDY ON HYDROLYSIS OF CELLULOSE (SAW-DUST)
16. 747. DESULPHURSATION KEROSENE
17. FORMULATION AND PRODUCTIOIN OF ALCOHOL FROM PALM WINE.
18. MANUFACTURE OF CEILING BOARD USING LOCAL MATERIALS
19. EXTRACTION OF OIL FROM LOCAL SEED (GROUNDNUT SEED) AND CHARACTERIZATION
20. ANALYSIS OF CRUDE PALM OIL
752. PROCESS AND QUALITY FACTORS IN LAUNDARY AND TOILET SOAP PRODUCTION
753. INTERFACE MONITORING AND ANALYSIS OF PIPELINE AND PRODUCTS MARKETING COMPANY LIMITED DEPOT.
754. PRODUCTION OF BLACK AND BROWN POLISH
755. DESIGN AND OPERATION OF A SHELL AND TUBE HEAT EXCHANGER
756. PRODUCTION OF LIQUID AND VAPOURIZED PERFUME
757. PRODUCTION OF DOMESTIC POWDER
758. PRODUCTION OF A HIGH QUALITY BAR SOAP AND COMPARE WITH DETERGENT
759. PRODUCTION OF EMULSION PAINT WITH THE AVAILABLE MATERIAL
760. PRODUCTION OF STARCH FROM CASSAVA
761. PRODUCTION OF PLANT MIRROR USING LOCAL RAW MATERIAL
762. PRODCUTION OF WOOD ADHESIVE
763. TEMPERATURE AND WATER REQUIREMENT FOR LEACHING OF CAUSTIC ALKALI FROM ‘NGU’
764. ANALYSIS OF CRUDE PALM OIL
765. CONSTRUCTION OF OFFICE TABLE AND CHAIRS
766. THE BLEACHING OF PALM OIL USING ACTIVATED CHARCOAL
767. ALTERNATIVE RAW MATERIAL SOURES FOR CEMENT PRODUCTION
768. THE EFFECT OF ENVIRONMENT ON CORROSION
769. THE EFFECT OF LIQUID FLOW RATE AND GAS FLOW RATE ON A PACKED ABSORPTION TOWER AND REPAIR OF EQUIPMENT
770. REFINING OF VEGETABLE OIL WITH COAL
771. PRODUCTION OF HIGH QUALITY FOAM
772. THE REFURBISHMENT OF FLUID FLOW DEMONSTRATION UNIT
773. ABSORPTION OF PALM OIL WITH SYNTHETIC ADSORBENT (COAL)

MORE PROJECT TOPICS:

1. CONSTRUCTION OF PROPELLER AGITATOR
2. ADSORPTION OF PALM OIL WITH SYNTHETIC ADSORBENT (COAL)
3. ALTERNATIVE RAW MATERIAL SOURCES FOR CEMENT
4. ANALYSIS OF CRUDE PALM OIL
5. ANALYSIS OF ENUGU COAL.
6. BLEACHING OF PALM OIL USING NATURAL ADSORBENT
7. COMPARATIVE ANALYSIS OF COAL AND COCONUT ACTIVATED CARBON
8. COMPARISM RESEARCH ON SOAP AND DETERGENT POWDER
9. CONSTRUCTION OF “S” LITER ELECTRIC KETTLE
10. CONSTRUCTION OF 2,000 LITRES CAPACITY WATER RE-SERVOIR.
11. CONSTRUCTION OF A HYDROCYCLONE
12. CONSTRUCTION OF A PILOT MOTORISED MIXER
13. Construction of A SIMPLE SIZE reduction MACHINE
14. CONSTRUCTION OF A STANDARD DRAWING DESK
15. CONSTRUCTION OF A VERTICAL FIRE TUBE BOILER
16. CONSTRUCTION OF A WOODEN BOOK SHELF
17. CONSTRUCTION OF ALUMINUM WALL RACK
18. CONSTRUCTION OF BOOK SHELVE
19. CONSTRUCTION OF CELLOPHANCE SEALING MACHINE
20. CONSTRUCTION OF FLOW NOZZLE
21. CONSTRUCTION OF INDUSTRIAL WHEEL BARROW
22. CONSTRUCTION OF KEROSINE COOKING STOVE
23. CONSTRUCTION OF METAL MOULD FOR SOAP PRODUCTION.
24. CONSTRUCTION OF OFFICE TABLE AND CHAIRS
25. CONSTRUCTION OF PACKED DISTILLATION COLUMN
26. CONSTRUCTION OF PORTABLE WHEEL-BARROW.
27. CONSTRUCTION OF PROPELLER AGITATOR.
28. CONSTRUCTION OF SHEEL AND TUBE HEAT EXCHANGER
29. CONSTRUCTION OF SOAP CUTTING TABLE, SOAP MOULD AND SOAP CUTTERS
30. CONSTRUCTION OF STEEL CUPBOARD
31. CONSTRUCTION OF STEEL SHELF (BOOK SHELF)
32. CONSTRUCTION OF TABLE TOP LIQUIDLIQUID EXTRACTION UNIT
33. CONSTRUCTION OF TUBULAR HEAT EXCHANGER
34. Construction of turbine mixer
35. CONSTRUCTION OF WATER STORAGE TANK (2000 LITRES)
36. CONSTRUCTION OF WHEELBARROW
37. CONSTRUCTOIN OF AN OPEN STEAM DISTILLATOIN COLUMN
38. CONTRUCTION OF A BLENDER
39. contruction of a reading table and a chair
40. DESIGN AND CONSTRUCTION OF A REFRIGERATING UNIT.
41. DESIGN AND OPERATION OFA SHELL AND TUBE HEAT EXCHANGER
42. DESULPHURSATION KEROSENE
43. DETERMINATION OF EQUILIBRIA FROM FERMENTED PALM WINE
44. DEVELOPING THE PROCESS OF PLASTIC INDUSTRY IN NIGERIA
45. EFFECT OF INTERFACE ON THE QUALITY OF PETROLEUM PRODUCT IN MULTI-PURPOSE PIPELINE SYSTEM
46. EXTRACTION OF OIL FROM LOCAL SEED (GROUNDNUT SEED) & CHARACTERIZATION
47. FABICATION OF BRIQUETTE STOVE
48. FABRICATION OF CANDLE MOULD WITH TWENTYFOUR (24) HOLES.
49. FABRICATION OF CENTRIFUGAL MIXER
50. FORMULATION AND PRODUCTIOIN OF ALCOHOL FROM PALM
51. FORMULATION AND PRODUCTION OF LEVERA SOAP
52. INTERFACE MONITORING AND ANALYSIS OF PIPELINE AND PRODUCTS MARKETING COMPANY LIMITED ENUGU DEPOT.
53. MANUFACTURE OF CEILING BOARD USING LOCAL MATERIALS
54. MODIFICATION OF MODEL SEDIMENTATION TANK
55. MODIFICATION OF PROTO-TYPE AIR CONDITIONING UNIT.
56. NEW FORMULAE FOR ESTIMATING FIXED INVESTMENT CAPITAL COSTS.
57. PROCESS AND QUALITY FACTORS IN LAUNDARY AND TOILET SOAP PRODUCTION
58. PROCESS DEVELOPMENT IN THE PRODUCTION OF VEGETABLE OIL FROM LOCAL RAW MATERIAL
59. PRODCUTION OF WOOD ADHESIVE.

60. PRODUCTION OF A HIGH QUALITY BAR SOAP AND COMPARE WITH DETERGENT.
61. PRODUCTION OF ALKALI USING LOCAL RAW MATERIAL (PALM INFORESCENCE)
62. PRODUCTION OF BLACK AND BROWN POLISH BROWN POLISH.
63. PRODUCTION OF DOMESTIC POWDER
64. PRODUCTION OF EMULSION PAINT WITH THE AVAILABLE MATERIAL
65. PRODUCTION OF HIGH QUALITY BODY PERFUME
66. PRODUCTION OF HIGH QUALITY FOAM.
67. PRODUCTION OF HOUSE HOLD INSECT- KILLER
68. PRODUCTION OF LOQUID AND VAPOURIZED PERFUME
69. PRODUCTION OF PLANT MIRROR USING LOVCAL RAW MATERIAL
70. PRODUCTION OF PLASTIC MATERIALS.
71. PRODUCTION OF STARCH FROM CASSAVA.
72. PRODUCTION OF VEGETABLE OIL USING ENUGU COAL
73. REFINING OF VEGETABLE OIL WITH ENUGU COAL
74. REFURBISHING OF A FIXED AND FLUIDIZED BED.
75. REFURBISHMENT OF A VACUUM OVEN
76. REFURISHMENT OF THE FLUID FLOW DEMONSTRATION UNIT.
77. REPAIR AND REFURBISHING OF PILOT PLANT TEMPERATURE CONTROL APPARATUS
78. REPAIR OF STOP CLOCKS
79. RESEARCH PROJECT ON BLEACHING OF PALM OIL WITH NIGERIA CLAY
80. SYNTHESIS OF ACTIVATED CARBON FROM ENUGU COAL
81. TEMPERATURE AND WATER REQUIREMENT FOR LEACHING OF CAUSTIC ALKALT FROM ‘NGU’.
82. THE BLEACHING OF PALM OIL USING ACTIVATED CHARCOAL
83. THE CONSTRUCTION OF SIEVE EQUIPMENT
84. THE DESIGN AND CONSTRUCTION OF A 40 WATT HI-FI AMPLIFIER
85. THE EFFECT OF ENVIRONMENT ON CORROSION
86. THE EFFECT OF LIQUID FLOERATE AND GAS FLOWRATE ON A PACKED ABSORPTION TOWER AND REPAIR OF EQUIPMENT
87. THE FABRICATION FOR A SET OF SIEVES AND SAKER
88. THE PRODUCTION OF INDUSTRIAL PAINT (EMULSION PAINT).
89. THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION & PRODUCTION OF EMULSION PAINT
90. UTLILIZATION STUDIES OF ENUGU COAL
91. WATER PURIFCATION UNIT.

PROJECT MATERIALS IN CHEMICAL ENGINEERING

Author: daniel